HP 3PAR StoreServ 7450 4-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 121

createhost DESCRIPTION The createhost command creates or adds paths to a new system host and provides the option of assigning one or more paths to that host. Paths can be either Fibre Channel WWNs or iSCSI names. The command also provides options to annotate the host with descriptor information such as physical location, IP address, Operating System, Model, and so on. SYNTAX The syntax for the creathost command can be one of the following: • createhost [options] [...] • createhost -iscsi [options] [...] AUTHORITY • Super, Edit. • Any role granted the host_create right. NOTE: You need access to all domains in order to run this command. OPTIONS -add Adds the specified WWN(s) or iscsi_name(s) to an existing host (at least one WWN or iscsi_name, must be specified. See "NOTES" for additional information about this option. -domain Creates the host in the specified domain or domain set. The default is to create it in the current domain, or no domain if the current domain is not set. The domain set name must start with set:. -f Forces the tear down and removal of lower priority VLUN exports if necessary. See "NOTES" for additional information about this option. -persona Sets the host persona that specifies the personality for all ports which are part of the host set. This selects certain variations in SCSI command behavior which certain operating systems expect. The is the host persona ID number with the desired capabilities. These can be seen with showhost -listpersona. -loc Specifies the host's location. -ip Specifies the host's IP address. -os Specifies the operating system running on the host. -model Sets the host's model. -contact Sets the owner of the host and contact information. -comment createhost 121