HP 3PAR StoreServ 7450 4-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 256

removevlun DESCRIPTION The removevlun command removes a Virtual Volume's (VVs) SCSI Logical Unit Number (LUN) export definition from the system. SYNTAX The syntax for the removevlun command can be one of the following: • removevlun [options] • removevlun [options] • removevlun [options] • removevlun [options] AUTHORITY • Super, Edit • Any role granted the vlun_remove right. OPTIONS -novcn Specifies that a VLUN Change Notification (VCN) not be issued after removal of the VLUN. • For direct connect or loop configurations, a VCN consists of a Fibre Channel Loop Inititalization Primitive (LIP). • For fabric configurations, a VCN consists of a Registered State Change Notification (RSCN) that is sent to the fabric controller. -pat Specifies that the , ,< N:S:P>, and specifiers are treated as glob-style patterns and that all VLUNs matching the specified pattern are removed. By default, confirmation is required to proceed with the command unless the -f option is specified. -dr Specifies that the operation is a dry run and no VLUNs are removed. -f Specifies that the command is forced. If this option is not used, the command requires confirmation before proceeding with its operation. SPECIFIERS Specifies the volume or volume set name, using up to 31 characters in length. The volume set name must start with set:. Specifies the LUN ID to remove. Specifies that exports to the specified port are removed. If this specifier is not used, the host_name specifier must be used. node Specifies the system port where node is a number from 0 through 7. 256 Remove Commands