HP 3PAR StoreServ 7450 4-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 246

removesnmppw DESCRIPTION The removesnmppw command allows a user to remove SNMP access community string passwords. WARNING! SNMP cannot be used in Common Criteria mode. It might compromise the security of the storage system. SYNTAX removesnmppw [options] AUTHORITY • Super • Any role granted the snmppw_remove right. NOTE: You need access to all domains in order to run this command. OPTIONS -rw|-r|-w Removes the read/write (-rw), read-only (-r), or write-only (-w) password. If not specified, the read/write community string password is removed. -f Forces the operation so that the command does not require confirmation before proceeding. SPECIFIERS None. RESTRICTIONS Access to all domains is required to run this command. EXAMPLES The following example displays the removal of the read/write SNMP access password: cli% removesnmppw -f EXIT STATUS The following codes are returned indicating success or failure: • 0 indicates that the password was removed and the command was successful. • 1 indicates that the command failed. • 2 indicates that a password does not exist. NOTES • After a password has been removed, the system manager can no longer use that password to send requests to the SNMP agent. • Verify the removal of SNMP passwords by issuing the showsnmppw command. See "showsnmppw" (page 474) for additional information. 246 Remove Commands