HP 3PAR StoreServ 7450 4-node HP 3PAR OS 3.1.2 Release Notes - Page 18
HP-UX 11.31 with Symantec Storage Foundation DMP, Solaris 11 with Brocade Fabric
View all HP 3PAR StoreServ 7450 4-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Improving the transition time in a future release is planned. • Solaris 11 with Brocade Fabric Occasionally, Solaris hosts that are attached through a Brocade fabric lose paths after a failover or failback. In this case the host seems to have a problem with multiple FC_IDs referenced in the RSCN payload from the switch. This is an intermittent issue seen about 10% of the time. Ultimately the fix for this needs to be done on the host and is currently being investigated. • RHEL 6.2 with VXDMP Periodically, there will be multipath errors during failover. These errors describe devices going offline and within seconds the devices are back on line. Improving the transition time in a future release is planned. • AIX 7.1 with VXDMP When an Inserv node is rebooting and failover triggered, the host DMP software marks paths as 'disabled'. The paths are not automatically re-enabled by the DMP restore process. The paths are only restored by issuing the vxdctl enable command or when the InServ node completes rebooting. • HP-UX 11.31 with Symantec Storage Foundation DMP To take advantage of the Persistent ports feature, the following DMP tunables must be disabled: # vxdmpadm settune dmp_fast_recovery=off # vxdmpadm settune dmp_monitor_fabric=off 18 HP 3PAR OS 3.1.2 GA Release Notes