HP 400N HP JetDirect 400N Print Server Hardware Installation Guide - 5969-3587 - Page 53
Novell NetWare Frame Types, on an HP JetDirect Token Ring Card, To con a NetWare frame type
UPC - 088698733714
View all HP 400N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Novell NetWare Frame Types on an HP JetDirect Token Ring Card Frame Type AUTO (default) TR_8022 TR_SNAP Description Automatically senses and limits the frame type to the one detected. Limits the frame type to IPX over IEEE 802.2 with IEEE 802.5 frames. All others will be counted and discarded. Limits the frame type to IPX over SNAP with IEEE 802.5 frames. All others will be counted and discarded. To configure a NetWare frame type NOTE For HP 2500C/CM Professional Series and DesignJet ColorPro GA printers, see the "HP 2500C/CM Professional Series and DesignJet ColorPro GA Control Panel" instructions at the end of this chapter. If you have not already done so, enable Novell NetWare (IPX/ SPX=ON*) by following the instructions described in "To enable or disable network protocols" in this chapter. 1. Take the printer offline by pressing [On Line] or [Go] to indicate offline. 2. Press [Menu] repeatedly until the following message is displayed on the control panel: 4 Series printers AUX IO MENU 4 Plus and 4V Series printers MIO MENU Color LaserJet printers (Proceed to Step 4) MIO CONFIG MENU CFG NETWORK=NO * 4Si Series printers (select the MIO MENU 1 or card slot being configured) MIO MENU 2 5Si Series printers (select the HP MIO 1 MENU or card slot being configured) HP MIO 2 MENU 5 Series printers HP MIO MENU Printer Control 3 Panel Using the Control Panel for Printers 3-5