HP 418800-B21 HP StorageWorks MSA60/70 Storage Enclosure Firmware Release Note - Page 8
Smart Component installation instructions for Linux environments
UPC - 882780564640
View all HP 418800-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Smart Component installation instructions for Linux environments 1. Place the Smart Component in a temporary directory. 2. Open a Linux command console. 3. From the directory containing the downloaded file, enable execute access to this model by typing chmod +x CPxxxxxx.scexe, where CPxxxxxx.scexe represents the downloaded file. 4. Execute the Smart Component by entering a command similar to the following: ./ CPxxxxxx.scexe --target --user --passwd If the user name or password contains an exclamation mark (!), enclose the string in single quotes or enter a backslash (\) before the exclamation point. For example, '!manage' or \!manage. 5. Follow onscreen instructions. NOTE: When prompted for logon information, enter credentials for an account with management access rights. Binary file installation instructions using Storage Management Utility (SMU) WARNING! Do not perform a power cycle or controller restart during a firmware update. If the update is interrupted or there is a power failure, the module might become inoperative. If this occurs, contact technical support. The module might need to be returned to the factory for reprogramming. 1. Obtain the appropriate firmware file and download it to your computer or network. 2. If the system has a single controller, stop I/O to vdisks before starting the firmware update. 3. In the Configuration View panel, right-click the system and select Tools > Update Firmware. The tables titled Current Versions of Controller Module A and Current Versions of Controller Module B show the currently installed versions. 4. Click Browse and select the firmware file to install. 5. Click Install Controller-Module Firmware File. It takes approximately 10 minutes for the firmware to load and for the automatic restart to complete on the controller you are connected to. Wait for the progress messages to specify that the update has completed. If Partner Firmware Update is enabled, allow an additional 20 minutes for the partner controller to be updated. 6. Verify that the proper firmware version appears for each controller module. 8