HP 625n HP Jetdirect Administrator's Guide - Page 108
Table 4.1, HP Jetdirect Home Items 2 of 2, Using the Embedded Web Server 108 - jetdirect eio print server
UPC - 882780301252
View all HP 625n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Table 4.1 HP Jetdirect Home Page Items (2 of 2) Item Host Name System Up Time System Contact System Location HP Jetdirect Firmware Version IP Address Hardware Address LAA Admin Password Description Specifies the IP host name assigned to the device and stored on the HP Jetdirect print server. See TCP/IP on the Networking Tab. The length of time since either the HP Jetdirect print server or the network device was last powered off/on. A text string (stored on the HP Jetdirect print server) for the name of a person to contact for this device. See TCP/IP on the Networking Tab. A text string (stored on the HP Jetdirect print server) that identifies the physical location of this device. See the Networking TCP/IP configuration pages. The product number of the HP Jetdirect print server (for example HP J7934A). The version of the operating instructions installed on the HP Jetdirect print server. The Internet Protocol address configured on the HP Jetdirect print server. For general information on IP addresses, see Appendix A. The LAN hardware (or MAC, Media Access Control) address of the HP Jetdirect print server. This unique address is assigned by Hewlett-Packard, but can be locally administered. A Locally Administered Address (LAA) that replaces the LAN Hardware (MAC) address. The LAA may be configured under local control by a network administrator. By default, the LAA is the factory-assigned LAN Hardware address. Specifies whether or not an administrator password has been set. This password may also be configured through a Telnet session with the HP Jetdirect print server, or from HP Web Jetadmin. (EIO print servers only) Because passwords are synchronized with selected printers, the password may have also been set through printer security Web pages. Use the Admin Password page to set or clear administrator passwords. If an administrator password has been set, you will be prompted for a User Name and Password to access network parameters. For more information, click Help, or see the Admin. Account section in this guide. ENWW Using the Embedded Web Server 108