HP 625n HP Jetdirect Administrator's Guide - Page 95
Table 3.4, Telnet Commands and Parameters 17 of 18, TCP/IP Configuration 95
UPC - 882780301252
View all HP 625n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Table 3.4 Telnet Commands and Parameters (17 of 18) status-page-lang Specifies the printer job language (PJL) that the print server will use to send the Jetdirect configuration/status page to the printer. ● Auto (default): The PDL is auto-detected when the print server is powered on or after a cold-reset. ● PCL: Hewlett-Packard Printer Control Language ● ASCII: Standard ascii characters ● HPGL2: Hewlett-Packard Graphics Language (v2) ● PS: Postscript language link-type (10/100 Fast Ethernet) Sets the print server's link speed (10 or 100 Mbps) and communication mode (Full- or Half-Duplex). Selections are AUTO, 100FULL, 100HALF, 10FULL, 10HALF. For AUTO (default), the print server uses autonegotiation to determine the link speed and mode. If autonegotiation fails, then 100HALF is set. network-select (For HP Jetdirect products with a dual wired/wireless port, such as model ew2400) Specifies the active behavior of the print server. ● Auto (default): Automatically detects whether a network cable is attached. If a network cable is not attached, only the IEEE 802.11g wireless port will be active. However, if a network cable is attached, then only the IEEE 802.3 wired port will be active. Use caution when plugging in a network cable on an active wireless network. Wireless access to the device will be terminated. ● Wired: Only the 802.3 wired port will be active. ● Wireless: Only the 802.11g wireless port will be active. job-timeout (External print servers only) Specifies the time period after which an idle connection to the printer (for example, through the USB port) will be closed. An integer from 30 to 4294967295 seconds may be specified. If 0 is specified, the default value of 270 seconds is used. Support Command Description Web JetAdmin URL (Read-only parameter) If HP Web Jetadmin discovers this device, the URL to access HP Web Jetadmin will be specified. Web JetAdmin Name (Read-only parameter) If HP Web Jetadmin discovers this device, the name of the HP Web Jetadmin host will be specified (if known). support-name Typically used to identify the name of a person to contact for support of this device. ENWW TCP/IP Configuration 95