HP 750c HP DesignJet 700 user guide - Page 101

Working With Media and Cartridge(s) Unloading Media Device setup Drying time All menu modes Default: Normal To Adjust Drying Time You can make a global adjustment to the plotter's automatic drying times through the front-panel menus. Drying Time Selected in Front Panel None* Less Normal More Result The plotter cuts plot without delay. Adjusted for the driest expected environmental conditions. As described in the table on page 3-22 Adjusted for the most humid expected environmental conditions. * Not recommended if you are using roll media and leaving the plotter unattended, as the ink may smear when the plots are dropped into the media bin. IMPORTANT If you are operating your plotter in an extremely dry environment, select Less in the front panel menu. In an extremely humid environment, select More. For environmental specifications, see page 11-4. Adjusting drying times purely to speed up the plotter is not recommended as the quality of your plot can be impaired. MEDIA AND 3 CARTRIDGES 3-23