HP 8/20q HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 150

Current Return value Unsupported. Always returns error status NoSuchName. fcFxPortOperMode (1.3.6.1.2.1.75.1.2.1.1.3) The current operational mode of the FxPort Syntax INTEGER { unknown(1), fPort(2), flPort(3) } Access Read-only Status Current Return value See Table 33 for fcFxPortOperMode return values. Table 33 Port operational mode return values Mode Unknown F_Port FL_Port Return value 1 2 3 fcFxPortAdminMode (1.3.6.1.2.1.75.1.2.1.1.4) The desired operational mode of the FxPort Syntax INTEGER { fPort(2), flPort(3) } Access Read-write Status Current Return value Unsupported. Always returns error status NoSuchName. FxPort Physical Level table The objects described in this section are in table format, indexed by switch index and port index. An example of how to access one of these objects is: snmpget localhost public fcFxPortPhysAdminStatus.1.1. This table contains one entry for each FxPort in the Fabric Element, and the physical level status and parameters of the FxPorts. fcFxPortPhysAdminStatus (1.3.6.1.2.1.75.1.2.2.1.1) The desired state of the FxPort. A management station may place the FxPort in a desired state by setting this object accordingly. The testing(3) state indicates that no operational frames can be passed. When a Fabric Element initializes, all FxPorts start with fcFxPortPhysAdminStatus in the offline(2) state. As the result of either explicit management action or per-configuration information accessible to the Fabric Element, fcFxPortPhysAdminStatus is then changed to either the online(1) or testing(3) states, or remains in the offline state. Syntax 150 Fabric Element MIB Objects