HP 8/40 Access Gateway Administrator's Guide (53-1001760-01, June 2010) - Page 24
Access Gateway port types, Comparison of Access Gateway ports to standard switch ports
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
1 Access Gateway port types TABLE 1 Feature Fabric OS components supported on Access Gateway (Continued) Support Speed Negotiation Syslog Daemon Trunking ValueLineOptions (Static POD, DPOD) Web Tools Zoning Yes Yes Yes** Yes Yes NA 1. When a switch is behaving as an AG, RBAC features in Fabric OS are available, but there are some limitations. For more information on the limitations, refer to "Access Gateway hardware considerations" on page 5. 2. In embedded switches, time should be updated by the server management utility. Access Gateway port types Access Gateway differs from a typical fabric switch because it is not a switch; instead, it is a mode that you enable on a switch using the ag command. After a switch is set in ag mode, it can connect to the fabric using node ports (N_Ports). Typically fabric switches connect to the Enterprise fabric using ISL (InterSwitch Link) ports, such as E_Ports. Following are the Fibre Channel (FC) ports that AG uses: • F_Port - fabric port that connects a host, HBA, or storage device to a switch in AG mode. • N_Port - node port that connects a switch in AG mode to the F_Port of the fabric switch. Comparison of Access Gateway ports to standard switch ports Access Gateway multiplexes host connections to the fabric. It presents an F_Port to the host and an N_Port to an Edge fabric switch. Using N_Port ID Virtualization (NPIV), AG allows multiple FC initiators to access the SAN on the same physical port. This reduces the hardware requirements and management overhead of hosts to the SAN connections. A fabric switch presents F_Ports (or FL_Ports) and storage devices to the host and presents E_Ports, VE_Ports, or EX_Ports to other switches in the fabric. A fabric switch consumes SAN resources, such as domain IDs, and participates in fabric management and zoning distribution. A fabric switch requires more physical ports than AG to connect the same number of hosts. Figure 3 on page 5 shows a comparison of the types of ports a switch in AG mode uses to the type of ports that a switch uses in standard mode. 4 Access Gateway Administrator's Guide 53-1001760-01