HP 8/40 Access Gateway Administrator's Guide (53-1001760-01, June 2010) - Page 34
Adding F_Ports to an N_Port
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
2 Access Gateway mapping TABLE 5 Brocade Model 5480 Access Gateway default port mapping (Continued) Total Ports F_Ports N_Ports 24 1-16 0, 17-23 8000 32 8-31 0-7 FCoE ports mapped as F_Ports. Default Port Mapping 1, 2 mapped to 17 9, 10 mapped to 18 3, 4 mapped to 19 11, 12 mapped to 20 15, 16 mapped to 0 5, 6 mapped to 21 13, 14 mapped to 22 7, 8 mapped to 23 8-11 mapped to 0 12-15 mapped to 1 16-19 mapped to 2 20-23 mapped to 3 24-27 mapped to 4 28-31 mapped to 5 Adding F_Ports to an N_Port You can modify the default port mapping by adding F_Ports to an N_Port. Adding an F_Port to an N_Port routes that traffic to and from the fabric through the specified N_Port. You can assign an F_Port to only one primary N_Port at a time. If the F_Port is already assigned to an N_Port, you must first remove it from the N_Port before you can add it to a different N_Port. Use the following steps to add an F_Port to an N_Port. 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the ag command with the --mapadd n_portnumber "f_port1;f_port2;... "operand to add the list of F_Ports to the N_Port. The f_portlist can contain multiple F_Port numbers separated by semicolons, for example "17;18". switch:admin> ag --mapadd 13 "6;7" F-Port to N-Port mapping has been updated successfully 3. Enter the ag --mapshow command and specify the port number to display the list of mapped F_Ports. Verify that the added F_Ports appear in the list. switch:admin> ag --mapshow 13 N_Port : 13 Failover(1=enabled/0=disabled) : 1 Failback(1=enabled/0=disabled) : 1 Current F_Ports : None Configured F_Ports : 6;7 PG_ID : 0 PG_Name : pg0 14 Access Gateway Administrator's Guide 53-1001760-01