HP 8/40 Access Gateway Administrator's Guide (53-1001760-01, June 2010) - Page 40

20

Access Gateway Administrator’s Guide

53-1001760-01

Access Gateway mapping

2

Device mapping to N_Ports

Use the following steps to add one or more devices to an N_Port to route all device traffic to and

from the device through the specified N_Port. Also use these steps to remove device mapping to an

N_Port.

1.

Connect to the switch and log in using an account assigned to the admin role.

2.

To add one or multiple devices to an N_Port, enter the

ag --addwwnmapping

N_Port

command

with the

“[WWN];[WWN]”

option. All the listed device WWNs will use the N_Port if it is available.

The following example adds two devices to N_Port 17.

ag --addwwnmapping 17 “

10:00:00:06:2b:0f:71:0c;10:00:00:05:1e:5e:2c:11”

The --all options edit all the currently existing mappings. none of the --all options have any way

to detect what devices are using the switch. This option just edits the mappings that are in the

list.

To change all current device mappings to a different N_Port, enter the

ag --addwwnmapping

N_Port

command with the

--all

option.

The following command changes all the existing device mappings to use port 17.

ag --addwwnmapping 17 --all

3.

To remove mapping for one or multiple devices to an N_Port, enter the

ag --delwwnmapping

N_Port

command with the

“[WWN];[WWN]”

option. All the listed device WWNs will no longer try

to use the N_Port unless a device logs in through an F_Port that is mapped to the N_Port.

The following example removes two devices from N_Port 17.

ag --delwwnmapping 17 “

10:00:00:06:2b:0f:71:0c;10:00:00:05:1e:5e:2c:11”

To remove all devices currently mapped to an N_Port, enter the

ag --delwwnmapping

N_Port

command with the -

-all

option. All the listed devices will no longer try to use the N_Port unless

a device logs in through an F_Port that is mapped to the N_Port. The

-all

option is a shortcut for

specifying all of the devices that are already mapped with the

addwwnpgmapping

command.

The following command removes all devices currently mapped to port 17.

ag --delwwnmapping 17 --all

4.

Enter the

ag

--

wwnmapshow

command to display the list of N_Ports mapped to WWNs and

verify that the correct WWNs have been mapped or removed from the desired N_Port(s).

Disabling device mapping

Use the following procedures to disable device mapping for all or only specific devices. These

procedures are useful when you want to temporarily disable device mapping, then enable this at a

later time without reconfiguring your original mapping. To enable disabled mapping, refer to

“Enabling device mapping”

on page 21.

1.

Connect to the switch and log in using an account assigned to the admin role.

2.

Enter the

ag

--

wwnmappingdisable

with the

“[WWN]; [WWN]”

option to disable mapping for

specific WWNs. The device mappings will be ignored for all the listed device WWNs without

removing the entry from the WWN mapping database.

Section	Page
About This Document	13
How this document is organized	13
Supported hardware and software	13
What’s new in this document	14
Document conventions	15
Text formatting	15
Command syntax conventions	15
Notes, cautions, and warnings	15
Notice to the reader	16
Key terms	16
Additional information	17
Brocade resources	17
Other industry resources	17
Optional Brocade features	18
Getting technical help	18
Document feedback	19
Access Gateway Basic Concepts	21
In this chapter	21
Brocade Access Gateway overview	21
Comparing Native Fabric and Access Gateway modes	21
Fabric OS features in Access Gateway mode	23
Access Gateway port types	24
Comparison of Access Gateway ports to standard switch ports	24
Access Gateway hardware considerations	25
Configuring Ports in Access Gateway mode	27
In this chapter	27
Enabling and disabling Access Gateway mode	27
Port state description	29
Access Gateway mapping	30
Port-based mapping	30
Device-based mapping	35
Considerations for Access Gateway mapping	42
N_Port configurations	44
Displaying N_Port configurations	45
Unlocking N_Ports	45
Managing Policies and Features in Access Gateway Mode	47
In this chapter	47
Access Gateway policies overview	47
Displaying current policies	47
Access Gateway policy enforcement matrix	48
Advanced Device Security policy	48
How the ADS policy works	48
Enabling and disabling the Advanced Device Security policy	49
Setting the list of devices allowed to log in	49
Setting the list of devices not allowed to log in	50
Removing devices from the list of allowed devices	50
Adding new devices to the list of allowed devices	50
Displaying the list of allowed devices on the switch	51
ADS policy considerations	51
Upgrade and downgrade considerations for the ADS policy	51
Automatic Port Configuration policy	51
How the APC policy works	51
Enabling and disabling the APC policy	52
Automatic Port Configuration policy considerations	52
Upgrade and downgrade considerations for the APC policy	53
Port Grouping policy	53
How port groups work	53
Adding an N_Port to a port group	54
Deleting an N_Port from a port group	55
Removing a port group	55
Renaming a port group	55
Disabling the Port Grouping policy	55
Port Grouping policy modes	56
Creating a port group and enabling Automatic Login Balancing mode	56
Rebalancing F_Ports	57
Enabling Managed Fabric Name Monitoring mode	58
Disabling Managed Fabric Name Monitoring mode	58
Displaying the current fabric name monitoring timeout value	58
Setting the current fabric name monitoring timeout value	59
Port Grouping policy considerations	59
Upgrade and downgrade considerations for the Port Grouping policy	60
Device Load Balancing Policy	60
Enabling WWN Load Balancing	60
Disabling Device Load Balancing	60
Device Load Balancing considerations	61
Persistent ALPA Policy	61
Enabling Persistent ALPA	62
Disabling Persistent ALPA	62
Persistent ALPA device data	62
Removing device data from the database	62
Displaying device data	63
Clearing ALPA values	63
Persistent ALPA policy considerations	63
Upgrade and downgrade considerations for Persistent ALPA	63
Failover	64
Failover with port-based mapping	64
Failover with device-based mapping	66
Enabling and disabling Failover on a N_Port	67
Enabling and disabling Failover for a port group	67
Upgrade and downgrade considerations for Failover	68
Failback	68
Failback configurations in Access Gateway	68
Enabling and disabling Failback on an N_Port	69
Enabling and disabling Failback for a port group	70
Upgrade and downgrade considerations for Failback	70
Trunking in Access Gateway mode	70
How Trunking works	70
Configuring Trunking on the Edge switch	71
Configuration management for trunk areas	72
Enabling trunking	73
Disabling F_Port trunking	74
Trunking monitoring	74
Trunking considerations for the Edge switch	74
Trunking considerations for Access Gateway module	77
Upgrade and downgrade considerations for Trunking in Access Gateway mode	77
Adaptive Networking on Access Gateway	78
Upgrade and downgrade considerations with Adaptive Networking in AG mode enabled	79
Adaptive Networking on Access Gateway considerations	79
Per Port NPIV login limit	80
Setting the login limit	80
Considerations for the Brocade 8000	80
SAN Configuration with Access Gateway	83
In this chapter	83
Connectivity of multiple devices overview	83
Direct target attachment	83
Considerations	83
Target aggregation	84
Access Gateway cascading	84
Fabric and Edge switch configuration	85
Verifying the switch mode	85
Enabling NPIV on M-EOS switches	86
Connectivity to Cisco Fabrics	87
Enabling NPIV on a Cisco switch	87
Rejoining Fabric OS switches to a fabric	87
Reverting to a previous configuration	87
Troubleshooting	89

HP 8/40 Access Gateway Administrator's Guide (53-1001760-01, June 2010) - Page 40

Device mapping to N_Ports, Disabling device mapping

Page 40 highlights