HP 8/8 EZSwitchSetup Administrator's Guide v6.4.0 (53-1001344-03, June 2010) - Page 15
Supported switches
View all HP 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Supported switches 1 Configure your browser to check for newer versions of stored pages on every visit to the page. FIGURE 2 Configuring Internet Explorer Supported switches You can use EZSwitchSetup with the following switches: • Brocade 300 switch • Brocade 4100 switch • Brocade 4900 switch • Brocade 5000 switch • Brocade 5100 switch • Brocade 5300 switch • Brocade 7800 switch • Brocade 8000 switch • Brocade VA-40FC switch Your switch must meet the following requirements: • It must be connected to an Ethernet LAN that is accessible by the host. If it is not, the system issues the message "Page not Found." • It must have licensed FC ports. If the switch has no licensed FC ports, you must first install a POD license and then enable the affected ports. For more information, refer to the section "Add port license" on page 36 • It must be in a single-switch fabric. If your switch connects to another switch (if there is an E_Port on the switch), you cannot manage the switch using EZSwitchSetup until you disconnect the switch connection. EZSwitchSetup Administrator's Guide 3 53-1001344-03