HP 8/80 Access Gateway Administrator's Guide (53-1001760-01, June 2010) - Page 41
Enabling device mapping, Display device mapping information
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Access Gateway mapping 2 The following example disables device mapping for two WWNs. switch:admin> ag --wwnmappingdisable "10:00:00:06:2b:0f:71:0c; 10:00:00:05:1e:5e:2c:11" Enter the ag command with the ag--wwnmappingdisable with the --all option to disable mapping for all available WWNs. The -all option will not affect mappings made in the future, Disabled mappings can be modified without automatically enabling them. The following example removes device mapping for all available WWNs. switch:admin> ag --wwnmappingdisable --all Enabling device mapping Use the following steps to enable device mapping for all or specific devices that were previously disabled. 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the ag --wwnmappingenable command with the "[WWN]; [WWN]" option to enable mapping for specific WWNs. The following example enables two device WWNs. switch:admin> ag --wwnmappingenable "10:00:00:06:2b:0f:71:0c; 10:00:00:05:1e:5e:2c:11" Enter the ag --wwnmappingenable with the --all option to enable mapping for all currently available WWNs. The -all option will not affect mappings made in the future, any mapping added for a new device, that is one who's mapping is not disabled, will be enabled by default. Disabled mappings can be modified with out automatically enabling them. The following command enables all previously disabled device mappings. switch:admin> ag --wwnmappingenable --all Display device mapping information Use the --wwnmapshow command to display static and dynamic mapping information about all device WWNs that have been mapped to N_Ports or N_Port groups. For each WWN, this command displays the following: • WWN - Device WWNs that are mapped to N_Ports • 1st N_Port - First or primary mapped N_Port (optional) • 2nd N_Port - Secondary or failover N_Port (optional) • PG_ID - Port Group ID where the device is mapped (mapped) • Current - The N_Port that the device is using (none displays if device not logged in) • Enabled - Indicates whether device mapping is enabled or disabled Note that new device mappings will only be enabled and display the next time the device logs into the switch. Access Gateway Administrator's Guide 21 53-1001760-01