HP 8/80 Access Gateway Administrator's Guide (53-1001760-01, June 2010) - Page 57
Rebalancing F_Ports
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Port Grouping policy 3 Port Group 3 created successfully 3. Enter the ag --pgshow command to verify the port group was created. switch:admin> ag --pgshow PG_ID PG_Name PG_Mode N_Ports F_Ports 0 pg0 lb,mfnm none none 2 SecondFabric - 0;2 4;5;6 3 FirstFabric lb 1;3 10;11 Rebalancing F_Ports To minimize disruption that could occur once F_Ports go offline or when additional N_Ports are brought online you can modify the default behavior of the automatic login balancing feature by disabling or enabling rebalancing of F_Ports when F_Port offline or N_Port online events occur. 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the agautomapbalance --enable command with appropriate operands to enable automatic login redistribution of F_Ports. In the following example, rebalancing of F_Ports in port group 1 in Access Gateway is enabled when an F_Port online event occurs. switch:admin> agautomapbalance --enable -fport -pg 1 3. Enter the agautomapbalance --disable - all command with appropriate operands to disable automatic login distribution of N_Ports for all PGs in the Access Gateway when an N_Port online event occurs. switch:admin> agautomapbalance --disable -nport -all 4. Enter the agautomapbalance --disable - all command with appropriate operands to disable automatic login distribution of F_Ports for all port groups in the Access Gateway when an F_Port online event occurs. switch:admin> agautomapbalance --disable -fport -all 5. Enter the agautomapbalance --show command to display the automatic login redistribution settings for port groups. In the following example, there are two port groups, 0 and 1. switch:admin> agautomapbalance --show AG Policy: pg PG_ID LB mode nport fport 0 Enabled Enabled Disabled 1 Disabled - - This command also displays the automatic login redistribution settings for N_Ports and F_Ports as shown in the following example. switch:admin> agautomapbalance --show AG Policy: Auto Access Gateway Administrator's Guide 37 53-1001760-01