HP 8/80 Fabric OS Administrator's Guide v6.4.0 (53-1001763-01, June 2010) - Page 291

Zone creation and maintenance 11 Viewing a zone in the defined configuration 1. Connect to the switch and log in as admin. 2. Enter the zoneShow command, using the following syntax: zoneshow[--sort] ["pattern"] [, mode] If no parameters are specified, the entire zone database (both the defined and effective configuration) is displayed. Example The following example shows all zones beginning with A, B, or C, in ascending order: switch:admin> zoneshow --sort "[A-C]*" zone: Blue_zone 1,1; array1; 1,2; array2 zone: Bobs_zone 4,5; 4,6; 4,7; 4,8; 4,9 Validating a zone 1. Connect to the switch and log in as admin. 2. Enter the cfgShow command to view the zone configuration objects you want to validate. switch:admin> cfgShow Defined configuration: cfg: USA_cfg Purple_zone; White_zone; Blue_zone zone: Blue_zone 1,1; array1; 1,2; array2 zone: Purple_zone 1,0; loop1 zone: White_zone 1,3; 1,4 alias: array1 21:00:00:20:37:0c:76:8c; 21:00:00:20:37:0c:71:02 alias: array2 21:00:00:20:37:0c:76:22; 21:00:00:20:37:0c:76:28 alias: loop1 21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df 3. Enter the zone --validate command to list all zone members that are not part of the current zone enforcement table. Note that zone configuration names are case-sensitive; blank spaces are ignored. switch:admin> zone --validate "White_zone" 4. Enter the following command to validate all zones in the zone database in the defined configuration. switch:admin> sw5:root> zone --validate -m 1 Defined configuration: cfg: cfg1 zone1 cfg: cfg2 zone1; zone2 zone: zone1 1,1; ali1 zone: zone2 1,1; ali2 alias: ali1 10:00:00:05:1e:35:81:7f*; 10:00:00:05:1e:35:81:7d* alias: ali2 10:00:00:05:1e:35:81:09*; 10:00:00:05:1e:35:81:88* Invalid configuration * - Member does not exist Fabric OS Administrator's Guide 251 53-1001763-01