HP 9040mfp HP LaserJet 9040mfp/9050mfp - Software Technical Reference (externa - Page 108
Print on Both Sides, Automatically printing on both sides, Flip s Up - fuser
UPC - 829160403649
View all HP 9040mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
■ Print Page Borders check box ■ Page Order drop-down menu Print on Both Sides The default setting for the Print on Both Sides option is off (not selected). Print on Both Sides is available when the following conditions exist: ■ Type is: on the Paper tab is set to any type except Labels, Transparency, or Envelope. ■ Size is: is set to any size except Statement, Envelope #10, Envelope DL, Envelope C5, Envelope B5, Envelope Monarch, Double Postcard (JIS), or Double Japan Postcard Rotated. When Paper Size is set to Letter, Legal, or A4, selecting Print on Both Sides makes the Flip Pages Up and Booklet Printing options available. Automatically printing on both sides The duplexing unit in the product prints on two sides of a sheet of paper when the Print on Both Sides option is specified in the print job. The HP LaserJet 9040/9050mfp comes with a duplexing unit installed. The HP LaserJet 9040/9050mfp supports smart duplexing. The smart duplexing feature increases printing performance by preventing one-page print jobs or single-sided pages of a duplexed print job from going through the duplexing unit even when the duplexing feature has been selected in the driver. All media types support the smart duplexing feature, except for media types that cannot be printed on both sides, such as labels, and the following media types: ■ Prepunched ■ Preprinted ■ Letterhead When the media type is set to Unspecified, the smart duplexing feature is disabled. To achieve the best print quality when printing on the second side of the page, the product needs to make adjustments to its print modes. When you select a media type, you are, in effect, instructing the product to use a group of settings, such as fuser temperature and print speed, to produce the best possible quality. This group of settings is known as a mode or print mode, and a different print mode is used with each media type. Print-mode adjustments are automatic when the duplexing unit is used. Flip Pages Up The Flip Pages Up check box, which is available only when Print on Both Sides is selected, is used to specify the duplex-binding option. By default, the Flip Pages Up check box is not available. The following table demonstrates the results of selecting this box, depending on the media orientation that is selected on the Basics tab. Table 3-2 Page orientation Orientation (Basics tab) Portrait Flip Pages Up selected Short-edge binding Flip Pages Up not selected Long-edge binding 92 3 HP traditional print drivers for Windows