HP 932c HP DeskJet 930CM Printer - (English) UserÂ’s Guide for Mac - Page 10
Printer Maintenance Tips - ink levels
View all HP 932c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
1 Printing Basics OUT Tray The printer sends finished pages to the OUT tray. OUT Tray Flap Down - This is the typical position for most types of printing. The down position also allows single envelope printing and printing on media smaller than 100 x 148 mm or 4 x 5 5/8 inches. For information about printing on other media, see Chapter 2. Out Tray Flap Up - The OUT Tray Flap must be in the up position to properly load banner paper. The OUT Tray Flap must remain in the up position to print banners. Single envelope and small media slot Paper width guide OUT Tray Flap down OUT Tray Flap up Printer Maintenance Tips Because the printer ejects ink onto the paper in a fine mist, ink smudges will eventually appear on the printer case. To remove smudges, stains, and/or dried ink from the exterior of the printer, use a soft cloth moistened with water. For information on cleaning print cartridges and the print cartridge cradle, see page 33. When cleaning your printer, keep these tips in mind: • Do not clean the interior of the printer. Keep all fluids away from the interior. • Do not use household cleaners or detergent. In the event that a household cleaner or detergent is used on the printer, wipe the printer's exterior surfaces with a soft cloth moistened with water. • Do not lubricate the print cartridge support rod. Noise is normal when the print cartridge cradles slide back and forth. Caution For maximum performance and reliability, the printer should be handled and stored in an upright, level position. Do not tip your printer after heavy use. If the printer is tipped soon after heavy printing, excess ink can spill. Clean up spilled ink using the methods just described. 3