HP AE326A HP StorageWorks 1500 Modular Smart Array installation guide (355901 - Page 62
Installing MSA-specific components on the servers, HP MPIO Full Featured Device Specific Module DSM
UPC - 882780184954
View all HP AE326A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Installing MSA-specific components on the servers Because these installation processes involve updating the server configuration, HP recommends performing these tasks during inactive periods. MSA-specific components include the following: • HBA drivers • Array Configuration Utility (ACU) • Array Configuration Utility-Command Line Interface (ACU-CLI) (The ACU-CLI is not supported on IA64 platforms.) • Array Diagnostic Utility (ADU) • HP MPIO Full Featured Device Specific Module (DSM) • HP MPIO DSM (Device Specific Module) Manager To install these components on the server: 1. With the HBAs installed in the server, power on the server and start your Windows operating system. NOTE: If the New Hardware Wizard is displayed, click Cancel to prevent installation of an HBA driver that is unsupported for use with the MSA. 2. Insert the MSA Support Software CD in the CD-ROM drive of the server and let it auto-start the installation program. If the CD does not start automatically, access the CD-ROM drive, browse the directory of the CD, and execute the setup.exe file on the CD. NOTE: If you created a new Support Software CD from the Web, insert that CD in the CD-ROM drive of the server and do not use the shipping version of the CD. For more information, see the following sections in this guide: • "Determine which version of MSA controller firmware to use" on page 15 • "Obtain desired controller firmware and Support Software CD versions" on page 56 The installation program scans the server to identify the HBAs and determine which driver to install. This scan may take a few moments. 3. When prompted, read and accept the license agreement. 62 Configuration procedures-Windows environments