HP AH226A HP 8 Internal Port SAS Controller and HP Multi-Port Internal SAS Con - Page 18
Enabled BIOS & OS, Enabled BIOS Only, Enabled OS Only, or
UPC - 882780748774
View all HP AH226A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
The information fields on the Adapter Properties screen are as follows: Adapter Indicates the specific SAS Host Bus Adapter type. PCI Address Displays the PCI address assigned by the system BIOS to the adapter. • Bus value range 0x00 - 0xFF, 0 - 255 decimal • Device value range 0x00 - 0x1F, 0 - 31 decimal • Function range 0x00 - 0x7, 0 - 7 decimal MPT Firmware Revision SAS Address Status Displays the MPT firmware version and type in the format x.xx.xx.xx-yy, where x.xx.xx.xx indicates the firmware version and yy indicates the type. In the example screen the firmware version is 1.23.33.00 and the type is IR. Displays the SAS Address assigned to this adapter. Indicates whether the adapter is eligible for configuration utility software control or is reserved for control by other software: Enabled, Disabled, or Error. Enabled Indicates the EFI driver is controlling the adapter, or will attempt to control the adapter upon reload. Disabled Indicates the EFI driver is not controlling the adapter or will discontinue control of the adapter upon reload. Error Indicates that the EFI driver encountered a problem with the adapter. You can view and modify settings for the adapter but the available information and functionality may be limited. Boot Support Indicates whether the adapter is eligible for configuration utility software control, or is reserved for control by other software: Enabled BIOS & OS, Enabled BIOS Only, Enabled OS Only, or Disabled. 18 Configuring the Controller Offline