HP AP775A Cisco MDS 9000 Family Command Reference Guide - Release 4.x (OL-1808 - Page 35

Send documentation comments to [email protected] New and Changed Information Table 1 summarizes the new and changed commands for Cisco MDS NX-OS Release 4.1(3) and tells you where they are documented in the Cisco MDS 9000 Family Command Reference . The Cisco MDS 9000 Family Command Reference applies to Cisco NX-OS Release 4.1(3), but describes all features in Cisco SAN-OS releases. If you are running Cisco SAN-OS 3.x or lower software on an MDS switch, refer to the Cisco MDS 9000 Family CLI Command Reference for the release train that applies to the release on your switch. Note As of NX-OS Release 4.1(1b), SAN-OS has been changed to NX-OS. References to SAN-OS releases before 4.1(1b) still apply. Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference Feature Description New and Changed Commands for Cisco NX-OS Release 4.1(3) Call Home destination-profile command (Added the HTTPs URL and transport method to the syntax description) Port Guard errdisable detect cause link-down command Port Owner switchport owner command F port Trunking feature command (Added features hhtp-server, fport-channel-trunk, npiv and npv to the syntax description) switchport command (Added the F and NP port mode) show flogi database interface command Where Documented D Commands E Commands S Commands F Commands S Commands Show Commands OL-18089-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Command Reference xxxiii