HP AP775A Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr
HP AP775A - Nexus Converged Network Switch 5010 Manual
UPC - 884962062708
View all HP AP775A manuals
Add to My Manuals
Save this manual to your list of manuals |
HP AP775A manual content summary:
- HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 1
Send documentation comments to [email protected] Cisco MDS 9100 Series Hardware Installation Guide February 2008 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 2
and used in accordance with the instruction manual, may cause harmful interference to radio the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Guide Copyright © 2004-2008 Cisco Systems, Inc. All rights - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 3
Fabric Manager xiii Command-Line Interface xiii Intelligent Storage Networking Services Configuration Guides xiii Troubleshooting and Reference xiii Installation and Configuration Note xiii Obtaining Documentation, Obtaining Support, and Security Guidelines xiv Product Overview 1-1 Cisco MDS 9100 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 4
Port 3-1 Connecting the Console Port to a PC 3-2 Connecting a Modem to a Console Port 3-3 Connecting the 10/100 Ethernet Management Port 3-3 Cisco MDS 9100 Series Hardware Installation Guide iv OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 5
for Cisco GE/FC SFP Transceivers B-6 Environmental and Electrical Specifications for Cisco GE/FC SFP Transceivers B-7 OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide v - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 6
Console Port to a Computer Using the DB-9 Adapter C-3 MGMT 10/100 Ethernet Port C-3 Supported Power Cords and Plugs C-4 Power Cords C-4 Jumper Power Cord C-5 D A P P and Site Information D-3 Chassis and Network Information D-4 Cisco MDS 9100 Series Hardware Installation Guide vi OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 7
com New and Changed Information This Cisco MDS 9100 Series Hardware Installation Guide applies to Cisco MDS NX-OS Release 4.1(1b) and earlier Cisco MDS SAN-OS releases. Table 1 lists the new and changed features available with each supported Cisco MDS NX-OS release and SAN-OS release for the Cisco - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 8
Not release allows single-user installation and specific installation in a Telco rack. Support for connecting the console 1.2(2a) port on the Cisco MDS 9100 Series chapter. For troubleshooting information, see the Cisco MDS 9000 Family Troubleshooting Guide. This guide. Installing the Switch - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 9
you need to be familiar with electronic circuitry and wiring practices and preferably be an electronic or electromechanical technician. Organization This guide is organized as follows: Chapter Title Description Chapter 1 Product Overview Provides an overview of the Cisco MDS 9100 Series Fixed - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 10
take note. Notes contain helpful suggestions or references to material not covered in the manual. Cautions use the following conventions: Caution Means reader be careful. In this situation, noudattaminen ja tietoa turvallisuudesta). Cisco MDS 9100 Series Hardware Installation Guide x OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 11
Safety Information (Información sobre seguridad y conformidad con las disposiciones reglamentarias) que se acompaña con este dispositivo. OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide xi - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 12
Software Compatibility Information • Cisco MDS 9000 Family Interoperability Support Matrix • Cisco MDS Storage Services Module Interoperability Support Matrix • Cisco MDS NX-OS Release Compatibility Matrix for Storage Service Interface Images Regulatory Compliance and Safety Information • Regulatory - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 13
Storage Networking Services Configuration Guides • Cisco MDS 9000 Family Data Mobility Manager Configuration Guide • Cisco MDS 9000 Family Storage Media Encryption Configuration Guide • Cisco MDS 9000 Family Secure Erase Configuration Guide - For Cisco MDS 9500 and 9200 Series Troubleshooting and - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 14
Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0. Cisco MDS 9100 Series Hardware Installation Guide xiv OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 15
9500 Series multilayer directors for a transparent, end-to-end service delivery in large data-center core-edge deployments. The Cisco The Cisco MDS 9120 and the Cisco MDS 9140 Fibre Channel switches are not supported on NX-OS Release 4.1(1b). The Cisco MDS 9100 Series is packaged Guide 1-1 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 16
quickly enable server access to storage devices. For a list of features supported on the Cisco MDS 9134 Switch and the Cisco MDS 9124 Switch and MDS 9000 Family Fabric Manager Configuration Guide and the Cisco MDS 9000 Family CLI Configuration Guide. This chapter describes hardware information about - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 17
, and port security at the application level. For a list of features supported on the Cisco MDS 9124 Switch, see the Cisco MDS 9000 Family Fabric Manager Configuration Guide and the Cisco MDS 9000 Family CLI Configuration Guide. Figure 1-1 Cisco MDS 9134 Switch 184091 OL-17951-02 Cisco MDS 9100 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 18
, zoning, and port security at the application level For a list of features supported on the Cisco MDS 9124 Switch, see the Cisco MDS 9000 Family Fabric Manager Configuration Guide and the Cisco MDS 9000 Family CLI Configuration Guide. Cisco MDS 9140 Switch The Cisco MDS 9140 Switch has a total of - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 19
intelligence features such as virtual SANs (VSANs), quality of service (QoS), and N-port interface virtualization (NPIV). It also Translation (NAT). The Cisco MDS Fibre Channel Bladeswitch for IBM BladeCenter supports up to 16 VSANs per blade switch. Each external port on Installation Guide 1-5 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 20
. (See the "Power Specifications" section on page B-2.) Note The new DC power supply is not supported on the Cisco MDS 9140 Switch and the Cisco MDS 9120 Switch. Caution Power supplies for the Cisco 9124 Switch requires four fans. Cisco MDS 9100 Series Hardware Installation Guide 1-6 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 21
group 1 Port group 2 Port group 3 Port group 4 Port group 5 Port group 6 Port group 7 Port group 8 and 9 OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 1-7 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 22
860 meters and 10 kilometers, respectively. The two 10-Gbps ports support X2 form factor optics, either copper or optical. For more , see the Cisco MDS 9000 Family CLI Configuration Guide and the Cisco MDS 9000 Family Fabric Manager Configuration Guide. Figure 1-6 shows the Cisco MDS 9134 ports. - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 23
demand port licenses, contact your customer service representative and refer to Part Number 9000 Family CLI Configuration Guide and the Cisco MDS 9000 Family Fabric Manager Configuration Guide. See Figure 1-7. performance host or target controllers. These ports support a sustained data rate of up to - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 24
module status LED 184093 4 10/100 Ethernet management port link LED 5 10/100 Ethernet management port activity LED 1-10 Cisco MDS 9100 Series Hardware Installation Guide OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 25
LED 3 Fan module status LED 7 Bottom port link LED 4 10/100 Ethernet management port link LED OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 1-11 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 26
state of the LED is restored to reflect the beacon mode configuration after the external loopback is removed. 1-12 Cisco MDS 9100 Series Hardware Installation Guide OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 27
Cisco MDS SAN-OS Release 1.1(1a) or later and MDS NX-OS Release 4.1(1b) support combination Fibre Channel/Gigabit Ethernet SFP transceivers. SFP transceivers are field-replaceable. You can use "Cable and Port Specifications." OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 1-13 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 28
Gigabit Ethernet ports in the Cisco MDS 9100 Series support CWDM SFP transceivers. The Cisco CWDM SFP transceivers have LC connectors and support both Gigabit Ethernet and Fibre Channel (1-Gbps / 2- "Cable and Port Specifications." 1-14 Cisco MDS 9100 Series Hardware Installation Guide OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 29
the Switch, page 2-23 • Starting Up the Switch, page 2-24 • Removing and Installing Components, page 2-26 Note Before you install, operate, or service the system, read the Regulatory Compliance and Safety Information for the Cisco MDS 9000 Family for important safety information. OL-17951-02 Cisco - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 30
be allowed to install, replace, or service this equipment. Statement 1030 Note Each new switch requires a license; see the Cisco MDS 9000 Family Fabric Manager Configuration Guide and the Cisco MDS 9000 Family CLI Configuration Guide for instructions on installing a license. Preinstallation This - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 31
the Switch in a Cabinet or Rack" section on page 2-5. For instructions on installing the switch using the optional, separately purchased telco and EIA there is adequate space around the switch to allow for servicing the switch and for adequate airflow (airflow requirements are listed Guide 2-3 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 32
must be grounded through the power cable, the chassis ground, or the metal-to-metal contact with a grounded rack. Cisco MDS 9100 Series Hardware Installation Guide 2-4 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 33
support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco, contact Cisco Technical Support for damage and report any discrepancies or damage to your customer service representative. Have the following information ready: • Invoice number of Guide 2-5 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 34
M3 screws originally provided with the bracket. b. Repeat with the other C bracket on the other side of the switch. Cisco MDS 9100 Series Hardware Installation Guide 2-6 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 35
the slider rails. a. Repeat with the other slider rail on the other side of the rack. OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 2-7 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 36
horizontal and at the same height. Figure 2-2 Installing the Slider Rails 91631 Figure 2-3 Installing the Notched Slider Rails 182459 Cisco MDS 9100 Series Hardware Installation Guide 2-8 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 37
on the slider rails. Figure 2-4 Sliding the Cisco MDS 9100 Series onto the Slider Rails 91632 OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 2-9 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 38
rack-mount bracket on the other side of the switch. If you are installing the optional cable guides, place the cable guides in front of the front rack-mount brackets, and then pass the screws through the cable guides, front rack-mount brackets, and mounting rail. You can install one or both cable - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 39
. This cabinet meets the requirements described in Appendix A, "Cabinet and Rack Requirements," except the cabinet has OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 2-11 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 40
rack is otherwise stabilized. The rack-mount kit provided with the switch contains the items listed in Table 2-1. 2-12 Cisco MDS 9100 Series Hardware Installation Guide OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 41
Brackets and C Brackets Installed on the Cisco MDS 9100 Series 96616 2 1 Front rack-mount bracket 1 2 C bracket OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 2-13 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 42
of the switch. Figure 2-9 Front Rack-Mount Brackets (Rotated) and C Brackets Installed on the Cisco MDS 9100 Series 2 1 2-14 Cisco MDS 9100 Series Hardware Installation Guide 113431 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 43
Rails to the Front Rack-Mounting Rails OL-17951-02 Rear cabinet mounting rails Front cabinet mounting rails 113428 Cisco MDS 9100 Series Hardware Installation Guide 2-15 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 44
degree position. Your front rack-mount brackets may look different if you kept them in the normal position. 2-16 Cisco MDS 9100 Series Hardware Installation Guide OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 45
-mount bracket on the other side of the switch. If you are installing the optional cable guides, place the cable guides in front of the front rack-mount brackets, and then pass the screws through the cable guides, front rack-mount brackets, and rear mounting rail. You can install one or both cable - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 46
at the same height. Figure 2-13 Installing the Notched Slider Rails to the Front Rack-Mounting Rails 182462 2-18 Cisco MDS 9100 Series Hardware Installation Guide OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 47
top of the slider rail, as shown in Figure 2-16. This type of installation is hazardous. OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 2-19 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 48
Notched Slider Rail 182466 Figure 2-16 Incorrect Position of Power Cord Routed Over the Notched Slider Rail 182467 2-20 Cisco MDS 9100 Series Hardware Installation Guide OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 49
of a Cisco MDS 9134 Switch with a 10-Gbps transceiver plugged in and a copper cable are received. OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 2-21 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 50
two MDS 9134 Switches. Figure 2-18 Installing the MDS 9134 48-port and 64-port Stackable Bundles 270195 2-22 Cisco MDS 9100 Series Hardware Installation Guide OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 51
be the grounding type, and the grounding conductors should connect to protective earth ground at the service equipment. Note The grounding lug must be NRTL listed and compatible with copper conductors. Only copper for ampacity. OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 2-23 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 52
10/100 Ethernet port to the LAN until the initial switch configuration has been performed. For instructions on configuring the switch, see the Cisco MDS 9000 Family CLI Configuration Guide. For instructions on connecting to this port, see the "Connecting the Console Port" section on page 3-1. To - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 53
the switch has initialized without error messages. If any problems occur, see the Cisco MDS 9000 Family Troubleshooting Guide or the Cisco MDS 9000 Family System Messages Guide. If you cannot resolve an issue, contact your customer service representative. Complete the worksheets provided in Appendix - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 54
the backplane when the system is operating. Use caution when servicing. Statement 1034 Caution During this procedure, wear grounding wrist the switch. Note The Cisco MDS 9100 Series switch is only supported for operation with both power supplies and both fan modules installed Guide OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 55
of the Cisco MDS 9124 Switch Fixed fan Optional power module Power module Fixed fans OL-17951-02 182465 Cisco MDS 9100 Series Hardware Installation Guide 2-27 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 56
Switch Power modules 96615 Fan modules Removing and Installing AC Power Supplies This section provides instructions for removing and installing the AC power supplies for the Cisco MDS 9100 Series switches. See Figure 2-23. 2-28 Cisco MDS 9100 Series Hardware Installation Guide OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 57
by checking that the power supply (P/S) LED in the front panel is green. If the LED is not green, see the Cisco MDS 9000 Family Troubleshooting Guide. OL-17951-02 Cisco MDS 9100 Series Hardware Installation - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 58
.com Removing and Installing DC Power Supplies This section provides instructions for removing and installing the DC power supplies for the 9100 Series switch. Note The new DC power supply is not supported on the Cisco MDS 9140 Switch and the Cisco MDS 9120 Switch Installation Guide OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 59
by checking that the power supply (P/S) LED in the front panel is green. If the LED is not green, see the Cisco MDS 9000 Family Troubleshooting Guide. OL-17951-02 Cisco MDS 9100 Series Hardware Installation - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 60
documentation comments to [email protected] Removing and Installing Fan Modules This section provides instructions for removing and installing the fan modules for the Cisco MDS 9140 Switch and the Cisco in a safe place. 2-32 Cisco MDS 9100 Series Hardware Installation Guide OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 61
2-26 shows the Cisco MDS 9134 fan module. Figure 2-26 Cisco MDS 9134 Fan Module 184094 OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 2-33 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 62
Contact your customer service representative for assistance if, after several attempts, the fans do not operate or you experience trouble with the installation reseller directly for technical support. If you purchased this product directly from Cisco, contact Cisco Technical Support at this URL: - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 63
functions: • Configure the switch from the CLI. • Monitor network statistics and errors. • Configure SNMP agent parameters. OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 3-1 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 64
Series Send documentation comments to [email protected] • Download software updates to the switch or distribute software images residing the Cisco MDS 9100 Series switch. Note The PC must support VT100 terminal emulation. The terminal emulation software-frequently a Guide 3-2 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 65
-OS Release 1.2(2a) or later and Cisco MDS NX-OS Release 4.1(1b) support connecting the console port to a modem. To connect the console port to a modem configured Note For instructions on how to change these settings, see the Cisco MDS 9000 Family CLI Configuration Guide for instructions on how to - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 66
configuring the switch for in-band management, see the Cisco MDS 9000 Family Fabric Manager Configuration Guide and the Cisco MDS 9000 CLI Configuration Guide. The Cisco MDS 9000 Family supports both Fibre Channel and Gigabit Ethernet protocols for SFP transceivers. Each transceiver must match the - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 67
comments to [email protected] The Cisco MDS 9000 Family supports SFP transceivers with the following two types of latching devices: • steps: Step 1 Attach an ESD-preventive wrist strap and follow its instructions for use. Caution If the transceiver does not install easily, ensure Guide 3-5 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 68
transceiver, follow these steps: Step 1 Step 2 Attach an ESD-preventive wrist strap and follow its instructions for use. Perform these steps if cable is installed in the transceiver: a. Record the cable and 21 22 23 24 181494 Cisco MDS 9100 Series Hardware Installation Guide 3-6 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 69
follow these steps: Step 1 Step 2 Step 3 Step 4 Attach an ESD-preventive wrist strap and follow its instructions for use. Remove the dust cover from the connector on the cable. Remove the dust cover from the cable See Figure 3-6). OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 3-7 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 70
not install easily, ensure it is correctly oriented before continuing. For instructions on verifying connectivity, see the Cisco MDS 9000 Family Fabric Manager Configuration Guide and the Cisco MDS 9000 Family CLI Configuration Guide. Removing a Cable from an SFP Transceiver Caution When pulling - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 71
is suspected, clean and then inspect fiber ends under a microscope to determine if damage has occurred. OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 3-9 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 72
Connecting to a Fibre Channel Port Chapter 3 Connecting the Cisco MDS 9100 Series Send documentation comments to [email protected] 3-10 Cisco MDS 9100 Series Hardware Installation Guide OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 73
. (45.1 cm). For four-post EIA racks, this is the distance between the two front rails. OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide A-1 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 74
45504 Phone: (800) 477-4000 Cabinet P/N: Rittal 9969427 Cabinet description: PS-DK/OEM Cabinet Assembly, 1998 x 600 x 1000 (H x W x D) (42U) Cisco MDS 9100 Series Hardware Installation Guide A-2 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 75
Shelf Bracket Kit (part number DS-SHELF=) can temporarily or permanently support the Cisco MDS 9100 Series during installation. Once the front rack to the rack-mounting rails, the shelf bracket can be removed. This kit supports the following configurations: • A Cisco MDS 9100 Series switch in a two- - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 76
not use. MDS 9506 30 lb 60 lb MDS 9216 15 lb 30 lb MDS 9100 7.5 lb 15 lb Cisco MDS 9100 Series Hardware Installation Guide A-4 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 77
into a Telco Rack 3 2 4 105088 OL-17951-02 1 Rack-mounting rail (2x) 2 Shelf bracket (2x) 3 10-32 screws (2x) 4 Crossbar Cisco MDS 9100 Series Hardware Installation Guide A-5 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 78
). Attach the crossbar to the rear of the shelf brackets as shown in Figure A-1, using the 10-32 screws. Cisco MDS 9100 Series Hardware Installation Guide A-6 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 79
the shelf brackets are at the same height (using the level or tape measure as desired). OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide A-7 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 80
This section provides general instructions for installing the switch on top of the shelf brackets. For detailed installation instructions, see the "Installing , replace, or service this equipment. Statement 1030 Note Before you install, operate, or service the system, refer Guide A-8 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 81
shelf brackets to the front rack-mounting rails and remove the shelf brackets from the rack. OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide A-9 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 82
Cisco MDS 9000 Family Telco and EIA Shelf Bracket Appendix A Cabinet and Rack Installation Send documentation comments to [email protected] A-10 Cisco MDS 9100 Series Hardware Installation Guide OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 83
(-60 to 2000 m) 60 dB Table B-2 lists the physical specifications for the Cisco MDS 9100 Series. OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide B-1 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 84
(43.69 cm) Height = 1.75 in. (4.45 cm) Depth = 23.1 in. (58.67 cm) Depth with cable guide = 28.1 in. (71.37 cm) Rack Unit (RU) Chassis requires 1 RU (1.75 in. or 4.45 cm) Weight 25 Guidelines for AC-Powered Systems, page B-5 Cisco MDS 9100 Series Hardware Installation Guide B-2 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 85
calculation of power and heat dissipation for the Cisco MDS 9100 Series AC input power supply. OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide B-3 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 86
(with fan modules) Cisco MDS 9120 Switch (with fan modules) DC Input Heat Diss. Power (watts) (BTU/hr) Not supported - Input Current 48 VDC (amps) 60 VDC (amps) - - Not supported - - - 204 maximum 928 5.67 4.53 180 maximum 819 5.00 4.00 Cisco MDS 9100 Series Hardware Installation - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 87
the receptacles should connect to protective earth ground at the service equipment. SFP Transceiver Specifications The Cisco MDS 9100 Series is transceiver meets the requirements for the switch. For the list of supported SFP transceivers, see the release notes. This section provides the Guide B-5 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 88
Transmit power -10 to -1.5 dBm -9.5 to -3 dBm 1. Approximate; actual distance may vary depending on fiber quality and other factors. Cisco MDS 9100 Series Hardware Installation Guide B-6 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 89
Cisco combination Gigabit Ethernet/Fibre Channel SFP transceivers. Note The cable distances provided are for 2-Gbps. OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide B-7 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 90
Table B-15 lists the CWDM SFP transceivers available through Cisco Systems. These SFP transceivers are supported by the Cisco MDS 9140 and Cisco MDS 9120 Switch. Table B-15 Cisco CWDM SFP chassis for CWDM add/drop multiplexers. Cisco MDS 9100 Series Hardware Installation Guide B-8 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 91
°C) -40 to 185°F (-40 to 85°C) Table B-19 provides the electrical specifications for CWDM SFP transceivers. OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide B-9 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 92
/° C dB dBm Average power coupled into single-mode fiber dBm @ 2.12 Gbps, 140°F (60°C) case temp. Nm dB B-10 Cisco MDS 9100 Series Hardware Installation Guide OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 93
.) 33 m (108.3 ft.) 66 m (216.5 ft.) 82 m (269 ft.) 300 m (984.3 ft.) 10 km (6.21 miles) OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide B-11 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 94
) -9.9 (Min) 840 to 860 0.5 (Max) -8.2 (Min) 0.5 (Max) -14.4 (Min) 1260 to 1355 4.0 (Max) -4.7 (Min) -1.0 (Max) -15.8 (Min) 1550 - - - B-12 Cisco MDS 9100 Series Hardware Installation Guide OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 95
/100 Ethernet Port, page C-3 • Supported Power Cords and Plugs, page C-4 service representative. Note If you purchased this product through a Cisco reseller, contact the reseller directly for technical support . If you purchased this product directly from Cisco, contact Cisco Technical Support - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 96
6 3 RJ-45 to DB-25 Terminal Adapter DB-25 Pin 5 6 3 7 7 2 Console Device Signal CTS DSR RxD GND GND TxD Cisco MDS 9100 Series Hardware Installation Guide C-2 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 97
cable. (See Figure C-1.) Figure C-1 RJ-45 Interface Cable Connector RJ-45 (both ends) H1567 Pin 1 Pin 8 OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide C-3 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 98
RD3 TD+ 6 TD- 4 NC 5 NC 7 NC 8 NC 4 NC 5 NC 7 NC 8 NC 65273 Supported Power Cords and Plugs A separate power cord is provided for each power supply. Standard power cords or jumper power cords with the switch are supported. Cisco MDS 9100 Series Hardware Installation Guide C-4 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 99
Power Cords and Plugs Send documentation comments to [email protected] Figure C-3 shows the supported plugs for the Cisco MDS 9100 Series power supplies. Figure C-3 300-W Power Supply Plugs 1 2 3 4 5 6 a cabinet. OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide C-5 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 100
Supported Power Cords and Plugs Appendix C Cable and Port Specifications Send documentation comments to [email protected] Figure C-4 Connectors on Jumper Power Cord for Cisco MDS 9100 Series C15 113165 C14 Cisco MDS 9100 Series Hardware Installation Guide C-6 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 101
about how to query the switch for configuration information, see the Cisco MDS 9000 Family Fabric Manager Configuration Guide and the Cisco MDS 9000 Family CLI Configuration Guide. Site Preparation Checklist Planning the location and layout of your equipment rack or wiring closet is essential for - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 102
installed in the chassis has a dedicated AC source circuit. 2. UPS = uninterruptible power supply. 3. RFI = radio frequency interference. Time Date Cisco MDS 9100 Series Hardware Installation Guide D-2 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 103
/site name Data center location Floor location Address (line 1) Address (line 2) City State Zip code Country OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide D-3 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 104
address Switch IP netmask Host name Domain name IP broadcast address Gateway/router address DNS address Modem telephone number Cisco MDS 9100 Series Hardware Installation Guide D-4 OL-17951-02 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 105
3-3 connecting to a PC 3-2 pinouts C-2 conventions cautions I-x description I-x notes I-x CWDM transceivers description 1-14 SFP transceiver specifications B-7 D documentation additional publications I-xii Cisco MDS 9100 Series Hardware Installation Guide IN-1 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 106
cables maintaining 3-9 Fibre Channel SFP transceiver specifications B-4 supported SFP transceivers 1-13 Fibre Channel/Gigabit Ethernet combination humidity specifications B-1 IN-2 Cisco MDS 9100 Series Hardware Installation Guide I IBM BladeCenter 1-5 installation cabinet or rack installation 2-5 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 107
network information D-4 RJ-45 connecting 3-3 S safety instructions 2-2 SFP transceivers CWDM 1-14 description 1-14 and installing cables into 3-7 specifications B-4 supported 1-13 specifications CWDM SFP transceivers B-7 Gigabit -17951-02 Cisco MDS 9100 Series Hardware Installation Guide IN-3 - HP AP775A | Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 108
Index Send documentation comments to [email protected] IN-4 Cisco MDS 9100 Series Hardware Installation Guide OL-17951-02
Send documentation comments to [email protected]
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco MDS 9100 Series Hardware
Installation Guide
February 2008
Text Part Number: OL-17951-02