HP AP775A Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, Febr - Page 37
Cisco MDS 9134 Switch or the Cisco MDS 9124 Switch, see,
UPC - 884962062708
View all HP AP775A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Chapter 2 Installing the Cisco MDS 9100 Series Installing the Switch in a Cabinet or Rack Send documentation comments to [email protected] Step 5 Insert the switch into the rack: a. By using both hands, position the switch with the back of the switch between the front rack-mounting rails as shown in Figure 2-4. If you are using the notched rails, for the Cisco MDS 9134 Switch or the Cisco MDS 9124 Switch, see Figure 2-5. b. Align the two C brackets on either side of the switch with the slider rails installed in the rack. Slide the C brackets onto the slider rails, and then gently slide the switch all the way into the rack. If the switch does not slide easily, try realigning the C brackets on the slider rails. Figure 2-4 Sliding the Cisco MDS 9100 Series onto the Slider Rails 91632 OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 2-9