HP AP775A Cisco MDS 9500 Series Hardware Installation Guide (OL-17467-02, Octo - Page 219
Component Power Requirements and Heat Dissipation for the Cisco MDS 9513 Director
UPC - 884962062708
View all HP AP775A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
Appendix D Technical Specifications Power Specifications for the Cisco MDS 9513 Director Send documentation comments to [email protected]. • Two AC power connection @ 220 VAC = 6000 W output If a 110 VAC input is chosen, a 110-VAC power cord (CAB-7513AC=) must be ordered separately. Note Power output does not include the power used by the individual modules used in the chassis. Table D-8 lists the specifications for the Cisco MDS 9513 power supplies. Table D-8 Specifications for Cisco MDS 9513 Power Supplies Description Specification 6000-W AC Power Supply Type Autoranging input with power factor corrector. Voltage 100 to 240 VAC (±10%). Current rating 16 A maximum at 100 to 120 VAC and 2900-W output. 16 A maximum at 200 to 240 VAC and 6000-W output. Frequency 50 to 60 Hz (nominal) (±3 Hz for full range). Output capacity One AC power connection @110 VAC = No output Two AC power connection @110 VAC = 2900 W output One AC power connection @ 220 VAC = 2900 W output One AC power connection @110 VAC and one AC power connection @ 220 VAC = 2900 W output Two AC power connection @ 220 VAC = 6000 W output Output voltage at 110/120 3.3 V at 10 A, 50 V at 57 A Output voltage at 200/240 3.3 V at 10A, 50 V at 119 A Component Power Requirements and Heat Dissipation for the Cisco MDS 9513 Director Consider heat dissipation when sizing the air-conditioning requirements for an installation. The power and heat associated with a Cisco MDS 9513 Director varies based upon the following considerations: • Power supply type • Switching module type and number of switching modules installed • Average switching traffic levels Table D-9 lists the power requirements and heat dissipation for the components of the Cisco MDS 9513 Director. Note Unless noted otherwise, the data listed in Table D-9 is based on worst-case conditions. Typical numbers are approximately 30 percent below the numbers listed here. OL-17467-02 Cisco MDS 9500 Series Hardware Installation Guide D-7