HP AP775A Cisco Nexus 5000 Series Hardware Installation Guide (OL-15902-01, No - Page 89

Appendix B Technical Specifications Power Specifications Send documentation comments to [email protected] The current power supply in the Nexus 5020 has a label for 200-240V. However, it has since been certified to support 110V input as well. As a result, both 110V and 220V inputs are supported and the labels on the chassis moving forwards will reflect this capability. A new software release will be required to support this capability. Specifications for the Cisco Nexus 5010 Power Supply The power supplies connect to the system through panel mount connectors and connectors attach to the baseboard through cables. There are total of 3 connectors on the baseboard, two for power delivery, and one for power supply control signals.Table B-6 lists the specifications for the Cisco Nexus 5010 power supply. Table B-6 Specifications for the Cisco Nexus 5010 Power Supply Description Rated power Input voltage Frequency PSU Control Interface ROHS Compliant Size (W x H x D) Cubic Inches Power Density Operating Temperature Cooling Input connector Output connector Hot plug capable Supply Indicators Specification 550W 90-264 VAC 47-63Hz I2C Yes 2.75 x 1.57 x 13.7 (in) 59 9.3 W / in3 0 oC to 50 oC Internal fans to cool the supply AC connector in the chassis DC output connector in the back Yes Supply Health: Green indicates supply is good and Amber indicates a fault. AC good indicator: Green indicating AC is present and is within the supply spec Power Supply LED Indicators Table B-7 lists the LED indicators for the LED on the front of the power supply. Table B-7 Power Supply LED Indicators Condition No AC power to the power supplies Power supply failure (includes over voltage, over current, over temperature, and fan failure) Power LED Status (Green) Off Off Fail LED Status (Amber) Off On OL-15902-01 Cisco Nexus 5000 Series Hardware Installation Guide B-3