HP AP775A Cisco Nexus 5000 Series Hardware Installation Guide, Cisco NX-OS Rel - Page 29

Chapter 1 Product Overview Nexus 5010 Switch Send documentation comments to [email protected] Model SFP-H10GB-CU3M SFP-H10GB-CU5M Description 10GBASE-CU SFP+ Cable 3 Meter 10GBASE-CU SFP+ Cable 5 Meter SFP Fiber Channel Transceivers The Cisco Nexus 5020 switch also supports the following SFP Fibre Channel transceiver: Model DS-SFP-FC4G-SW Description 4-Gbps/2-Gbps/1-Gbps Fibre Channel-short wavelength SFP module Nexus 5010 Switch This section describes the Cisco Nexus 5010 switch and its components. This section includes the following topics: • Features, page 1-15 • Chassis, page 1-16 • Ports, page 1-22 • Expansion Modules, page 1-19 • Power Supply, page 1-24 • Fan Module, page 1-25 • LED Descriptions, page 1-26 • Supported SFP Transceivers, page 1-27 Features The Cisco Nexus 5010 switch is a 1RU, top-of-rack switch that provides Ethernet and Fibre Channel consolidation in a single physical cable. The Fibre Channel over Ethernet (FCoE) protocol is used to consolidate Ethernet and Fibre Channel traffic onto the same physical connection between the server and the switch. As a top-of-rack switch, all the servers in the rack connect to the Cisco Nexus 5010 switch, and it connects to the LAN or SAN. The Cisco Nexus 5010 switch is a part of a family of switches that provide 10-Gigabit Ethernet and FCoE ports and both 10-Gigabit Ethernet and native 1-, 2-, and 4-Gbps Fibre Channel ports. The switches provide consolidated I/O connectivity to both production Ethernet LANs and Fibre Channel SANs in a cost-effective, high-performance, low-latency Ethernet switch. The Cisco Nexus 5010 switch has the following features: • One slot on the back of the switch for an optional uplink Gatos Expansion Module [GEM]. There are several modules which can be accommodated in this slot. Three such modules are N5K-M1404, N5K-M1600 and N5K-M1008. OL-15902-01 Cisco Nexus 5000 Series Hardware Installation Guide 1-15