HP AiO400r HP StorageWorks All-in-One Storage System User Guide (440583-005, F - Page 43
SAS and SATA hard drive LEDs, SAS/SATA hard drive LEDs
View all HP AiO400r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Item Description 17 10/100/1000 NIC activity LED 18 10/100/1000 NIC link LED Status Off = Not linked to network Green or flashing = Network activity Off = No network activity Green = Linked to network Off = Not linked to network SAS and SATA hard drive LEDs The following figure shows SAS/SATA hard drive LEDs. These LEDs are located on all HP All-in-One hot plug hard drives. Figure 9 SAS/SATA hard drive LEDs Table 13 SAS and SATA hard drive LED combinations 1. Fault/UID LED (amber/blue) 2. Online/activity LED Status (green) Alternating amber and blue On, off, or flashing The drive has failed, or a predictive failure alert has been received for this drive; it also has been selected by a management application. Steadily blue On, off, or flashing The drive is operating normally, and it has been selected by a management application. Amber, flashing regularly (1 Hz) On A predictive failure alert has been received for this drive. Replace the drive as soon as possible. Off On The drive is online, but it is not active currently. Amber, flashing regularly (1 Hz) Flashing regularly (1 Hz) Do not remove the drive. Removing a drive may terminate the current operation and cause data loss. The drive is part of an array that is undergoing capacity expansion or stripe migration, but a predictive failure alert has been received for this All-in-One Storage System 43