HP BL680c ProLiant BL680c Generation 5 Server Blade User Guide - Page 12
Local I/O cable
UPC - 884420396314
View all HP BL680c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
3. Remove the access panel (on page 14). 4. Change positions 1, 5, and 6 of the system maintenance switch to on. 5. Install the access panel (on page 15). 6. Install the server blade in the enclosure and power up the server blade. 7. After the system beeps, repeat steps 1 through 3. 8. Change positions 1, 5, and 6 of system maintenance switch to off. 9. Repeat steps 5 and 6. If both the current and backup versions of the ROM are corrupt, return the system board for a service replacement. To switch to the backup ROM when the System ROM is not corrupt, use RBSU ("HP ROM-Based Setup Utility" on page 49). Local I/O cable Item 1 2 3 4 Connector Server blade Video USB Serial Description For connecting to the local I/O cable connector on the server blade front panel For connecting a video monitor For connecting up to two USB devices For trained personnel to connect a null modem serial cable and perform advanced diagnostic procedures Component identification 12