HP CP4005dn HP Color LaserJet CP4005 - User Guide - Page 197
Unable to Store Job, TRAY X SIZE= [SIZE]
UPC - 882780717169
View all HP CP4005dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Control panel message TRAY X EMPTY [TYPE] [SIZE] alternates with Ready TRAY X OPEN For help press alternates with Ready TRAY X SIZE= [SIZE] Setting saved TYPE MISMATCH TRAY X=[TYPE] For help press alternates with Ready Unable to mopy job alternates with Processing... Unable to Store Job JOB NAME alternates with Processing... USB ACCESSORY ERROR For help press USE TRAY X [TYPE] [SIZE] To change press / To use press Wait for printer ENWW Description Recommended action 4. Close the image transfer unit and then close the top and front covers. 5. If the error persists, contact HP Support at http://www.hp.com/support/ljcp4005. The specified tray is empty and the current Refill the tray at a convenient time. job does not need this tray to print. The specified tray is open or not closed completely. Close the tray. The size selected from the menu has been No action is necessary. saved. The media type loaded in the tray does not 1. Adjust the side and rear guides against match the media type configured for the tray. the paper. 2. If necessary, press after the tray is closed to change the paper size or type to match the paper loaded in the tray. The print job cannot be mopied because of a Install additional memory in the printer. memory or configuration problem. Only one copy will be produced. A job cannot be stored because of a memory Install additional memory in the printer. or configuration problem. This message appears when a connected USB accessory draws too much power. When this happens, the ACC port is disabled and printing stops. Press to see step by step information. The printer is offering a selection of alternate 1. View tray configurations (type and size) media to use for the print job. using and . 2. Press to select a tray to use. 3. To return to the previous message, press Back. RAM disk settings have been changed before No action necessary. the printer automatically restarts, or external Control panel messages 181