HP Cisco MDS 9120 Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Rel - Page 32

The Java Help search engine in Cisco Fabric Manager and Device Manager does

Page 32 highlights

Caveats Send documentation comments to [email protected]. 3. Issue the no modem in command to disable the current modem from executing its functions: switch(config-console)# no modem in 4. Issue the modem in command to reconfigure the modem when the upgrade is finished: switch(config-console)# modem in • CSCin95789 Symptom: When you configure Cisco Traffic Analyzer to capture traffic on one or more interfaces on a Windows platform, the configuration web page might not show that the interface has been selected for traffic capture even though traffic capture on that interface is enabled. Workaround: Check the logs to clarify that the correct interface has been selected. • CSCsd21187 Symptom: If an iSNS client tries to register a portal separately after registering the network entity and storage node object with the Cisco MDS iSNS server, the portal registration might fail. Workaround: Register the portal at the same time as the network entity and storage node object registration. • CSCse31881 Symptom: If there are IP over Fibre Channel (IPFC) interfaces configured on an SSM, you might experience issues if you downgrade from SAN-OS Release 3.x to Release 2.x. Workaround: Before downgrading, remove the IPFC interface on the module and then recreate the IPFC interface after the downgrade is complete. • CSCsg19148 Symptom: Time zone changes that are executed on an MDS switch do not take effect on the 12-port, 24-port, and 48 port 1-Gbps/2-Gbps/4-Gbps Fibre Channel modules, and on the 4-port 10-Gbps module. This issue occurs in SAN-OS Releases 3.0(1), 3.0(2), 3.0(2a), and 3.0(3). Time zone changes that are executed on an MDS switch do not take effect on the 16-port or 32-port 1-Gbps/2-Gbps module, on the 4-port or 8-port Gigabit Ethernet IP services module, the MPS 14/2 module, and on the SSM. This issue occurs in SAN-OS Release 3.0(3). This issue has no effect on functionality. However, debug messages and syslogs from the MDS switching modules have incorrect timestamps if the time zone is configured on an MDS switch. Workaround: None. • CSCsg19303 Symptom: Graceful shutdowns of ISLs are not supported for IVR traffic. Workaround: Increase the fspf cost on the link before it is shut down, so that traffic will flow through an alternate path. • CSCsi51436 Symptom: Following a fabric reconfiguration, if you use Fabric Manager Server to discover the fabric and you check the Accelerate Discovery check box on the Discover New Fabric dialog box, some VSANs are segmented by Fabric Manager Server. VSANs may be segmented because they are isolated or down. Workaround: From Fabric Manager Server, close the fabric and then re-open it without checking the Accelerate Discovery check box on the the Discover New Fabric dialog box. • CSCsh68830 Symptom: The Java Help search engine in Cisco Fabric Manager and Device Manager does not work correctly in Cisco SAN-OS 3.1(2). Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.1(3) 32 OL-12208-05

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

Send documentation comments to [email protected].
32
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.1(3)
OL-12208-05
Caveats
3.
Issue the
no modem in
command to disable the current modem from executing its functions:
switch(config-console)#
no modem in
4.
Issue the
modem in
command to reconfigure the modem when the upgrade is finished:
switch(config-console)#
modem in
CSCin95789
Symptom
: When you configure Cisco Traffic Analyzer to capture traffic on one or more interfaces
on a Windows platform, the configuration web page might not show that the interface has been
selected for traffic capture even though traffic capture on that interface is enabled.
Workaround
: Check the logs to clarify that the correct interface has been selected.
CSCsd21187
Symptom
: If an iSNS client tries to register a portal separately after registering the network entity
and storage node object with the Cisco MDS iSNS server, the portal registration might fail.
Workaround
: Register the portal at the same time as the network entity and storage node object
registration.
CSCse31881
Symptom
: If there are IP over Fibre Channel (IPFC) interfaces configured on an SSM, you might
experience issues if you downgrade from SAN-OS Release 3.x to Release 2.x.
Workaround
: Before downgrading, remove the IPFC interface on the module and then recreate the
IPFC interface after the downgrade is complete.
CSCsg19148
Symptom
: Time zone changes that are executed on an MDS switch do not take effect on the 12-port,
24-port, and 48 port 1-Gbps/2-Gbps/4-Gbps Fibre Channel modules, and on the 4-port 10-Gbps
module. This issue occurs in SAN-OS Releases 3.0(1), 3.0(2), 3.0(2a), and 3.0(3).
Time zone changes that are executed on an MDS switch do not take effect on the 16-port or 32-port
1-Gbps/2-Gbps module, on the 4-port or 8-port Gigabit Ethernet IP services module, the MPS 14/2
module, and on the SSM. This issue occurs in SAN-OS Release 3.0(3).
This issue has no effect on functionality. However, debug messages and syslogs from the MDS
switching modules have incorrect timestamps if the time zone is configured on an MDS switch.
Workaround
: None.
CSCsg19303
Symptom
: Graceful shutdowns of ISLs are not supported for IVR traffic.
Workaround
: Increase the fspf cost on the link before it is shut down, so that traffic will flow
through an alternate path.
CSCsi51436
Symptom
: Following a fabric reconfiguration, if you use Fabric Manager Server to discover the
fabric and you check the
Accelerate Discovery
check box on the Discover New Fabric dialog box,
some VSANs are segmented by Fabric Manager Server. VSANs may be segmented because they are
isolated or down.
Workaround
: From Fabric Manager Server, close the fabric and then re-open it without checking
the
Accelerate Discovery
check box on the the Discover New Fabric dialog box.
CSCsh68830
Symptom
: The Java Help search engine in Cisco Fabric Manager and Device Manager does not
work correctly in Cisco SAN-OS 3.1(2).