HP Cisco MDS 9120 Cisco MDS 9000 Family CLI Configuration Guide, Release 3.x ( - Page 111

Chapter 2 Before You Begin Using Switch File Systems Send documentation comments to [email protected] • Compressing and Uncompressing Files, page 2-32 • Displaying the Last Lines in a File, page 2-32 Specifying File Systems The syntax for specifying a file system is scheme:[//server/]. Table 2-4 describes the file system syntax components. Table 2-4 Scheme bootflash slot0 File System Syntax Components Server sup-active sup-local sup-1 module-51 module-72 sup-standby sup-remote sup-2 module-61 module-82 - volatile - nvram - log system modflash - - slot-slot 1. Cisco MDS 9506 and Cisco MDS 9509 switches 2. Cisco MDS 9513 Directors Description Internal CompactFlash memory located on the active supervisor used for storing system images, configuration files, and other miscellaneous files. Internal CompactFlash memory located on the standby supervisor used for storing system images, configuration files, and other miscellaneous files. External CompactFlash installed in a supervisor module used for storing system images, configuration files, and other miscellaneous files Volatile random-access memory (VRAM) located on a supervisor module used for temporary or pending changes Nonvolatile random-access memory (NVRAM) located on a supervisor module used for storing the startup-config file Memory on the active supervisor that stores logging file statistics Memory on a supervisor module used for storing the running-config file CompactFlash located on a Storage Services Module (SSM) used for storing the SSI boot image Setting the Current Directory The cd command changes the current directory level to a specified directory level. CLI defaults to the volatile: file system. This command expects a directory name input. OL-16184-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family CLI Configuration Guide 2-27