HP Cisco MDS 9120 Cisco MDS 9000 Family CLI Configuration Guide, Release 3.x ( - Page 114

Using Switch File Systems Chapter 2 Before You Begin Send documentation comments to [email protected] Caution If a file with the same name already exists in the destination directory, that file is overwritten by the moved file. This example moves the file called samplefile from the root directory of the slot0: file system to the mystorage directory. switch# move slot0:samplefile slot0:mystorage/samplefile This example moves a file from the current directory level. switch# move samplefile mystorage/samplefile If the current directory is slot0:mydir, this command moves slot0:mydir/samplefile to slot0:mydir/mystorage/samplefile. Copying Files The copy command copies a file between file systems within a switch. Note Use the dir command to ensure that enough space is available in the target file system. If enough space is not available, use the delete command to remove unneeded files. The syntax for the copy command follows and is explained in Table 2-5. switch# copy scheme:[//module/]filename scheme:[//module/]filename Table 2-5 copy Command Syntax Scheme Module File Name bootflash sup-active sup-standby sup-1, module-51, or module-72 sup-2, module-61, or module-82 sup-local sup-remote User-specified slot0 - User-specified volatile - User-specified nvram - startup-config or snapshot-config system - running-config 1. Cisco MDS 9506 and Cisco MDS 9509 switches 2. Cisco MDS 9513 Directors This example copies the file called samplefile from the root directory of the slot0: file system to the mystorage directory. switch# copy slot0:samplefile slot0:mystorage/samplefile This example copies a file from the current directory level. switch# copy samplefile mystorage/samplefile 2-30 Cisco MDS 9000 Family CLI Configuration Guide OL-16184-01, Cisco MDS SAN-OS Release 3.x