HP Cisco MDS 9120 Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 55

Environmental requirements To ensure proper operation, the switch must not be subjected to environmental conditions beyond those for which it was tested. The ranges specified in Table 16 list the acceptable environment for both operating and non-operating conditions. Table 15 Environmental requirements Condition Acceptable range during operation Acceptable range during non-operation Ambient temperature 104°F/40 °C at sea level, derated -40°C to 70°C with maximum rate 1 C per 1000 ft above sea level of change of 20 C /hr Humidity 5% to 90% relative humidity, non-condensing 50% to 80% relative humidity, non-condensing Altitude 0 to 10,000 ft (3 km) above sea level 0 to 40,000 ft (12 km) above sea level Shock 40 G, 2mS duration 140 G, 2mS duration Vibration Airflow 0.5 G, 10 to 500 Hz 47 cubic ft per minute 2.0 G, 5 to 500 Hz None required Supported SFPs Do not use unsupported SFPs; they can affect switch operability. They may not fit correctlyand may void your warranty. See Optional hardware kits for a list of supported SFPs. For a complete list of supported devices, refer to the latest version of the HP StorageWorks SAN design reference guide: http://h18000.www1.hp.com/products/storageworks/san/documentation.html Supported HBAs For a list of HBAs that have been tested and are known to work with the SAN switches, refer to the latest version of the HP StorageWorks SAN design reference guide: http://h18000.www1.hp.com/products/storageworks/san/documentation.htm Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 55