HP Cisco MDS 9134 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 151

Chapter 5 Fabric Manager Client Launching Fabric Manager Client in Cisco SAN-OS Release 3.2(1) and Later Send documentation comments to [email protected] Step 12 Choose the Auth-Privacy option according to the privacy protocol you have configured on your switch: a. If you have not configured the switch with a privacy protocol, then choose Auth-Privacy option MD5 (no privacy). b. If you have configured the switch with your privacy protocol, please choose your Auth-Privacy choice. Note If you want a clean discovery, remove the fabric and rediscover it. Step 13 Click Discover. You see the Control Panel dialog box shown in Figure 5-6. Figure 5-6 Control Panel Dialog Box Note You see a message in the dialog box when the server and client are running on the same workstation and there are unlicensed fabrics in the database. You also see a message when there are unmanaged fabrics (the state of the licenses is unknown). Step 14 Check the check box(es) next to the fabric(s) you want to open in the Select column, or click Discover to add a new fabric. Note Only network administrators can continuously manage or unmanage fabrics. For more information, see the "Selecting a Fabric to Manage Continuously" section on page 3-4. Step 15 Click Open to open the selected fabric(s). Note If you have an incomplete view of your fabric, rediscover the fabric with a user that has no VSAN restriction. To launch Fabric Manager Client from within a running instance of Fabric Manager, follow these steps: Step 1 Step 2 Choose File > Open Fabric or click the Open Switch Fabric icon on the Fabric Manager toolbar. You see the Control Panel dialog box (see Figure 5-6). Check the check box(es) next to the fabric(s) you want to open in the Select column and click Open. OL-8007-10, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 5-5