HP Cisco MDS 9216A Cisco MDS 9000 Family System Messages Reference (OL-15956-0 - Page 177
IPS-4, Activate a zone set in the specified VSAN and retry.
View all HP Cisco MDS 9216A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message IPS-3-ISLB_ZONE_ACTIVATION_FAILED: iSLB zoneset activation returned [hex] for VSAN [dec]. Explanation iSLB zone set activation failed. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 3.0(1). IPS-4 Error Message IPS-3-ISLB_ZONE_ACTIVATION_RETRY: iSLB zoneset activation returned [hex] for VSAN [dec]. Explanation iSLB zone set activation failed because the zone server was busy. Recommended Action Retry the iSLB zone set activation. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message IPS-3-ISLB_ZONE_NO_ACTIVE_ZONESET: iSLB zonset activation returned [hex] for VSAN [dec]. Explanation iSLB zone set activation failed because there is no active zone set. Recommended Action Activate a zone set in the specified VSAN and retry. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message IPS-4-FCIP_FTA_CFG_MISMATCH: [chars]: Mismatch in FCIP FICON Tape Acceleration configuration with peer. Explanation The FCIP FICON Tape Acceleration configuration does not match the peer's configuration. Recommended Action Adjust the FCIP FICON tape acceleration configuration to be consistent with the peer. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message IPS-4-FCIP_FTA_VSAN_UPDATE_WARNING: FCIP FICON tape acceleration VSAN update had an error ([chars]) on interface [chars] causing a flap of the interface. Explanation The FCIP FICON tape acceleration VSAN configuration experienced an error when disabling and enabling the VSAN over the FCIP tunnel. The FCIP tunnel was disabled and re-enabled as a result of this error to ensure data integrity. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-141