HP Cisco MDS 9216A Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 474

debug vni Chapter 6 Debug Commands Send documentation comments to [email protected] debug vni To enable debugging for a virtual network interface (VNI), use the debug vni command in EXEC mode. To disable a debug command, use the no form of the command or use the no debug all command to turn off all debugging. debug vni {all | errors | events | info | pss} no debug vni {all | errors | events | info | pss} Syntax Description all errors events info pss Enables debugging for all VNI features. Enables debugging for VNI error conditions. Enables debugging for VNI events. Enables debugging for VNI events. Enables debugging for VNI PSS packets. Defaults Disabled. Command Modes EXEC mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines None. Examples The following example displays the system output when the debug vni all command is issued: switch# debug vni all Apr 29 17:00:59 vni: Received MTS message Apr 29 17:00:59 vni: message not processed by system mgr library , so process it normal way Related Commands Command no debug all Description Disables all debugging. 6-124 Cisco MDS 9000 Family Command Reference OL-18089-01, Cisco MDS NX-OS Release 4.x