HP Cisco MDS 9216A Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 510

fabric-binding database diff Chapter 8 F Commands Send documentation comments to [email protected] fabric-binding database diff To view the differences between the active database and the configuration database in a VSAN, use the fabric-binding database diff command in EXEC mode. fabric-binding database diff {active | config} vsan vsan-id Syntax Description active config vsan vsan-id Provides information on the differences in the active database with respect to the configuration database. Provides information on information on the differences in the configuration database with respect to the active database. Specifies the VSAN. The ID of the VSAN is from 1 to 4093. Defaults None. Command Modes EXEC mode. Command History Release 1.3(1) 3.0(1) Modification This command was introduced. Extended support of fabric binding to Fibre Channel VSANs. Usage Guidelines Fabric binding is configured on a per-VSAN basis and can be implemented in both FICON VSANs and Fibre Channel VSANs. Examples The following example displays the differences between the active database and the configuration database in VSAN 1: switch# fabric-binding database diff active vsan 1 The following example displays information on the differences between the configuration database and the active database: switch# fabric-binding database diff config vsan 1 Related Commands Command fabric-binding copy Description Copies from the active to the config fabric binding database. Cisco MDS 9000 Family Command Reference 8-6 OL-18089-01, Cisco MDS NX-OS Release 4.x