HP Cisco MDS 9216A Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 945

Chapter 21 S Commands scheduler Send documentation comments to [email protected] scheduler To schedule a maintenance job, use the scheduler command. To disable a job, use the no form of the command. scheduler {aaa-authentication [username username] password [0 | 7] password | job name job-name | logfile size filesize | schedule name schedule-name} no scheduler {aaa-authentication [username username] password [0 | 7] password | job name job-name | logfile size filesize | schedule name schedule-name} Syntax Description aaa-authentication username username password 0 7 password job name job-name logfile size filesize schedule name schedule-name LINE end exit Begins an AAA authentication exchange with a remote user. (Optional) Specifies the remote user and specifies the username. Specifies the password of the logged-in remote user for AAA authentication. (Optional) Specifies that the password is in clear text. (Optional) Specifies that the password is encrypted. Specifies the remote user's password. Specifies a scheduler job. Specifies the name of the scheduler job. The maximum length is 31 characters. Specifies a log file configuration. Specifies the size of the log file. The range is 16 to 1024 KB. Defines a schedule for the scheduler. Specifies the name of the schedule. The maximum length is 31 characters. Specifies the job configurations separated by semicolons. Returns you to EXEC mode. Returns you to Global Configuration mode. Defaults None. Command Modes Job Configuration mode. Command History Release NX-OS 4.1(3) NX-OS 4.1(1b) 2.0(x) Modification Deleted a note from the Usage Guidelines. Added a note to the Usage Guidelines. This command was introduced. Usage Guidelines None. OL-18089-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Command Reference 21-7