HP Cisco MDS 9216A Cisco MDS 9000 Family Storage Media Encryption Configuratio - Page 242
tune-timer
View all HP Cisco MDS 9216A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
tune-timer Appendix A Cisco SME CLI Commands Send documentation comments to [email protected] tune-timer To tune the Cisco SME timers, use the tune-timer command. To disable this command, use the no form of the command. tune-timer {global_lb_timer global_lb_timer_value | rscn_suppression_timer rscn_suppresion_timer_value | tgt_lb_timer tgt_lb_timer_value} no tune-timer {global_lb_timer global_lb_timer_value | rscn_suppression_timer rscn_suppresion_timer_value | tgt_lb_timer tgt_lb_timer_value} Syntax Description global_lb_timer global_lb_timer_value rscn_suppression_timer rscn_suppresion_timer_value tgt_lb_timer tgt_lb_timer_value Specifies the global load balancing timer value. Identifies the timer value. The range is from 5 to 30 seconds. The default value is 5 seconds. Specifies the Cisco SME Registered State Change Notification (RSCN) suppression timer value. Identifies the timer value. The range is from 1 to 10 seconds. The default value is 5 seconds. Specifies the target load balancing timer value. Identifies the timer value. The range is from 2 to 30 seconds. The default value is 2 seconds. Defaults None. Command Modes Cisco SME cluster configuration submode. Command History Release 3.3(1c) Modification This command was introduced. Usage Guidelines The tune-timer command is used to tune various Cisco SME timers such as the RSCN suppression, global load balancing, and target load-balancing timers. These timers should be used only in large scale setups. The timer values are synchronized throughout the cluster. Examples The following example configures a global load-balancing timer value: switch# config t switch(config))# sme cluster c1 switch(config-sme-cl)# tune-timer tgt_lb_timer 6 switch(config-sme-cl)# The following example configures a Cisco SME RSCN suppression timer value: switch# config t switch(config))# sme cluster c1 A-54 Cisco MDS 9000 Family Storage Media Encryption Configuration Guide OL-18091-01, Cisco MDS NX-OS Release 4.x