HP Cisco MDS 9222i Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS - Page 1161

Chapter 22 Show Commands show hardware Send documentation comments to [email protected] show hardware To display switch hardware inventory details, use the show hardware command. show hardware [ipc-channel status] Syntax Description ipc-channel status Displays the status of the interprocess communication (IPC) channels. Defaults None. Command Modes EXEC mode. Command History Release 1.2(1) Modification This command was introduced. Usage Guidelines None. Examples The following example displays the switch hardware inventory details. switch# show hardware Cisco Storage Area Networking Operating System (SAN-OS) Software TAC support: http://www.cisco.com/tac Copyright (c) 2002-2006, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained herein are owned by other third parties and are used and distributed under license. Some parts of this software may be covered under the GNU Public License or the GNU Lesser General Public License. A copy of each such license is available at http://www.gnu.org/licenses/gpl.html and http://www.gnu.org/licenses/lgpl.html Software BIOS: version 1.1.0 loader: version 1.2(2) kickstart: version 3.0(3) [gdb] system: version 3.0(3) [gdb] BIOS compile time: 10/24/03 kickstart image file is: bootflash:///boot-3.0.3 kickstart compile time: 9/15/2006 10:00:00 [10/02/2006 06:26:25] system image file is: bootflash:///isan-3.0.3 system compile time: 9/15/2006 10:00:00 [10/02/2006 06:45:25] Hardware cisco MDS 9509 ("Supervisor/Fabric-1") Intel(R) Pentium(R) III CPU with 1028604 kB of memory. OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 22-129