HP Cisco MDS 9222i Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS - Page 737

Chapter 11 I Commands ivr zoneset Send documentation comments to [email protected] ivr zoneset To configure a zoneset for Inter-VSAN Routing (IVR), use the ivr zoneset command. To revert to the factory defaults, use the no form of the command. ivr zoneset {activate name ivzs-name [force] | name ivzs-name} no ivr zoneset {activate name ivzs-name [force] | name ivzs-name} Syntax Description activate force name ivzs-name Activates a previously-configured IVZS. Forces a IVZS activation Specifies the IVZS name. Maximum length is 59 characters. Defaults None. Command Modes Configuration mode. Command History Release 1.3(1) Modification This command was introduced. Usage Guidelines This command enters IVR zoneset configuration submode. Examples The following command enters the configuration mode, enables the IVR feature, creates an IVZS, adds a IVZ member, and activates the IVZS. switch# config terminal switch(config)# ivr enable switch(config)# ivr zoneset name Ivr_zoneset1 switch(config-ivr-zoneset)# member Ivz_vsan2-3 switch(config-ivr-zoneset)# exit switch(config)# ivr zoneset activate name IVR_ZoneSet1 Related Commands Command show ivr Description Displays IVR feature information. OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 11-145