HP Cisco MDS 9222i Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS - Page 123

Chapter 2 A Commands aaa accounting default Send documentation comments to [email protected] aaa accounting default To configure the default accounting method, use the aaa accounting default command. To revert to the default local accounting, use the no form of the command. aaa accounting default {group group-name [none] | none} | local [none] | none} no aaa accounting default {group group-name [none] | none} | local [none] | none} Syntax Description group group-name local none Specifies the group authentication method. The group name is a maximum of 127 characters. Specifies the local authentication method. No authentication, everyone permitted. Defaults Local accounting. Command Modes Configuration mode. Command History Release 1.3(1) Modification This command was introduced. Usage Guidelines Specify the currently configured command preceded by a no in order to revert to the factory default. Examples The following example enables accounting to be performed using remote TACACS+ servers which are member of the group called TacServer, followed by the local accounting method. switch# config t switch(config)# aaa accounting default group TacServer The following example turns off accounting. switch(config)# aaa accounting default none The following example reverts to the local accounting (default). switch(config)# no aaa accounting default group TacServer Related Commands Command show aaa accounting Description Displays the configured accounting methods. OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 2-3