HP Cisco MDS 9222i Cisco MDS 9200 Series Hardware Installation Guide (OL-16188 - Page 145
Connecting the Console Port to a Computer Using the DB-9 Adapter, COM1 Port
View all HP Cisco MDS 9222i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Appendix C Cable and Port Specifications COM1 Port Connecting the Console Port to a Computer Using the DB-9 Adapter You can use the RJ-45 rollover cable and DB-9F/RJ-45F PC terminal (labeled "Terminal") to connect the console port to a computer running terminal emulation software. Table C-3 lists the pinouts for the console port, the RJ-45 rollover cable, and the DB-9F/RJ-45F PC terminal. Table C-3 Port Mode Signaling and Pinouts with the DB-9 Adapter Console Port RJ-45 Rollover Cable Signal RJ-45 Pin RJ-45 Pin RTS 1 8 DTR 2 7 TxD 3 6 GND 4 5 GND 5 4 RxD 6 3 DSR 7 2 CTS 8 1 DB9F/RJ45F PC Terminal DB-9 Pin 8 6 2 5 5 3 4 7 Console Device Signal CTS DSR RxD GND GND TxD DTR RTS COM1 Port The COM1 port is a serial port with a DB-9 connector. The COM1 port can be connected to a modem using the cable and adapters provided in the accessory kit. OL-16188-01 Cisco MDS 9200 Series Hardware Installation Guide C-3