HP Cisco MDS 9222i Cisco MDS 9000 Family Fabric Manager Configuration Guide - - Page 1200

SCSI Flow Services Chapter 55 Configuring SCSI Flow Services and Statistics Send documentation comments to [email protected] Step 1 Step 2 Expand End Devices and then select SSM Features in the Physical Attributes pane. You see the Intelligent Storage Services configuration in the Information pane. Click the SSM tab. You see the set of configured services in the Information pane shown in Figure 55-2. Figure 55-2 SSM Tab Step 3 Click Create Row to enable a new service on an SSM. You see the Create SSM dialog box shown in Figure 55-3. Figure 55-3 Create SSM Dialog Box Step 4 Step 5 Step 6 Select the switch and SSM card you want to configure. (Optional) Uncheck the Use All Ports on Module check box if you want to provision a subset of the ports on the card to use this service. Select the port range you want to provision for using this service (starting port and ending port). Note The port range must be a multiple of four (for example fc4/1 through fc4-12). Step 7 Step 8 Step 9 Select the feature you want to enable on these ports from the drop-down list of services. Set the PartnerImageURI field if you are enabling a third-party application that requires an image loaded onto the SSM. Click Create to create this row and enable this service. To configure a Fibre Channel using Fabric Manager, follow these steps: 55-4 Cisco MDS 9000 Family Fabric Manager Configuration Guide OL-17256-03, Cisco MDS NX-OS Release 4.x