HP Cisco MDS 9222i Cisco MDS 9000 Family Fabric Manager Configuration Guide - - Page 312

CFS Distribution over IP Chapter 13 Using the CFS Infrastructure Send documentation comments to [email protected] Step 4 Select the peers, and then click Ok to add the peers to the list. The peers are added to the list with To Be Added status. Figure 13-8 Confirm Peer Selection Step 5 Click Set to confirm adding the peers to the list and start the peers list propogation by CFS. Removing an NPV Device from the Peer List To delete a peer from the IP peer list using the Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Step 4 Step 5 From the Fabric Manager menu, select Tools > Other > NPV CFS Setup. The NPV CFS Setup wizard is launched. From the NPV Device to retrieve peer list from drop-down list box, select the device to retrieve the peer list from which you want to delete a peer. Do one of the following tasks to mark the peer or local host as deleted: • To delete a peer from the peer list, select the peer from the list, and then click Delete. • To delete the local host from the peer list, select the local NPV device and click Delete, or select all the peers in the list, and then click Delete All. Click Yes to delete the peer from the list. Click Set in the NPV CFS wizard. The following message box is displayed: 13-14 Cisco MDS 9000 Family Fabric Manager Configuration Guide OL-17256-03, Cisco MDS NX-OS Release 4.x