HP Cisco MDS 9222i Cisco MDS 9000 Family Fabric Manager Configuration Guide - - Page 667

Chapter 30 Configuring and Managing Zones Zone Configuration Send documentation comments to [email protected] You see the Create Zone dialog box shown in Figure 30-10. Figure 30-10 Create Zone Dialog Box Step 4 Step 5 Step 6 Step 7 Enter a zone name. Check one of the following check boxes: a. Read Only-The zone permits read and denies write. b. Permit QoS traffic with Priority-You set the priority from the drop-down menu. c. Restrict Broadcast Frames to Zone Members Click OK to create the zone. If you want to move this zone into an existing zone set, skip to Step 8. Click Zoneset in the left pane and click the Insert icon to create a zone set. You see the Zoneset Name dialog box shown in Figure 30-11. Figure 30-11 Zoneset Name Dialog Box Step 8 Enter a zone set name and click OK. Note One of these symbols or all alphanumeric characters are supported. In interop mode 2 and 3, this symbol (_) or all alphanumeric characters are supported. Step 9 Select the zone set where you want to add a zone and click the Insert icon or you can drag and drop Zone3 over Zoneset1. You see the Select Zone dialog box shown in Figure 30-12. OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 30-13