HP DC5100 Hardware Reference Guide - HP Business Desktop dc5100 Microtower Mod - Page 14
Installing Additional Memory, DIMMs, DDR2-SDRAM DIMMs
UPC - 072000919491
View all HP DC5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Hardware Upgrades Installing Additional Memory The computer comes with double data rate 2 synchronous dynamic random access memory (DDR2-SDRAM) dual inline memory modules (DIMMs). DIMMs The memory sockets on the system board can be populated with up to four industry-standard DIMMs. These memory sockets are populated with at least one preinstalled DIMM. To achieve the maximum memory support, you can populate the system board with up to 4GB of memory configured in a high-performing dual channel mode. DDR2-SDRAM DIMMs For proper system operation, the DDR2-SDRAM DIMMs must be: ■ industry-standard 240-pin ■ unbuffered PC3200 400 MHz-compliant or PC4300 533 MHz-compliant ■ 1.8 volt DDR2-SDRAM DIMMs The DDR2-SDRAM DIMMs must also: ■ support CAS latency 3, 4, or 5 (CL = 3, CL = 4, or CL = 5) for DDR2/400 MHz; supports CAS latency 4 or 5 (CL = 4 or CL = 5) for DDR2/533 MHz ■ contain the mandatory JEDEC SPD information In addition, the computer supports: ■ 256Mbit, 512Mbit, and 1Gbit non-ECC memory technologies ■ single-sided and double-sided DIMMS ■ DIMMs constructed with x8 and x16 DDR devices; DIMMs constructed with x4 SDRAM are not supported ✎ The system will not start if you install unsupported DIMMs. 2-4 www.hp.com Hardware Reference Guide