HP DC5100 Hardware Reference Guide - HP Business Desktop dc5100 Microtower Mod - Page 27
Restore Plus, If you replaced the primary hard drive, insert
UPC - 072000919491
View all HP DC5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Hardware Upgrades 4. If installing a new hard drive, connect the data cable to the system board. ✎ The replacement hard drive kit includes several data cables. Make sure to use the cable that is exactly the same as the factory-installed cable. ✎ If your system has only one SATA hard drive, you must connect the hard drive data cable to the dark blue connector labeled P60 SATA 0 to avoid any hard drive performance problems. If you are adding a second hard drive, connect the hard drive data cable to the white connector labeled P61 SATA 1. HP does not support connecting both SATA and PATA hard drives on the same system. 5. Complete the procedure described in the "Reassembling the Computer" section of this chapter. 6. Turn on the computer. ✎ If you replaced the primary hard drive, insert the Restore Plus! CD to restore the operating system, software drivers, and/or any software applications that were preinstalled on the computer from HP. Follow the instructions in the guide included with the restore CD. When the restore process has completed, reinstall any personal files that you backed up before replacing the hard drive. Hardware Reference Guide www.hp.com 2-17