HP DL320 HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide - Page 31

Optical Device/Diskette Drive Assembly Backplane

Get HP DL320 - ProLiant - G3 PDF manuals and user guides
UPC - 829160513218
View all HP DL320 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Removal and Replacement Procedures Optical Device/Diskette Drive Assembly Backplane To remove the optical device/diskette drive assembly backplane: 1. Power down the server. See "Powering Down the Server" in this chapter. 2. Remove the access panel. See "Server Access Panel" in this chapter. 3. Remove the shipping/ejector key. See "Shipping/Ejector Key" in this chapter. 4. Remove the optical device/diskette drive assembly or bezel blank. See "Optical Device/Diskette Drive Assembly" or "Bezel Blank" in this chapter. 5. Disconnect the optical device/diskette drive assembly cable from the optical device/diskette drive assembly backplane (1). 6. Carefully pull back and hold the plastic retaining clip (2). 7. Lift the backplane vertically until it unseats from the drive bracket and user interface board (3). Figure 2-14: Removing the optical device/diskette drive assembly backplane (center wall removed for clarity) Reverse steps 1 through 7 to replace the optical device/diskette drive assembly backplane. 2-20 HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Moonstar 306 Part Number: 293164-004 Last Saved On: 9/22/03 1:47 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Removal and Replacement Procedures
Optical Device/Diskette Drive Assembly Backplane
To remove the optical device/diskette drive assembly backplane:
1.
Power down the server. See “Powering Down the Server” in this chapter.
2.
Remove the access panel. See “Server Access Panel” in this chapter.
3.
Remove the shipping/ejector key. See “Shipping/Ejector Key” in this chapter.
4.
Remove the optical device/diskette drive assembly or bezel blank. See
“Optical Device/Diskette Drive Assembly” or “Bezel Blank” in this chapter.
5.
Disconnect the optical device/diskette drive assembly cable from the
optical device/diskette drive assembly backplane (1).
6.
Carefully pull back and hold the plastic retaining clip (2).
7.
Lift the backplane vertically until it unseats from the drive bracket and user interface
board (3).
Figure 2-14: Removing the optical device/diskette drive assembly
backplane (center wall removed for clarity)
Reverse steps 1 through 7 to replace the optical device/diskette drive assembly backplane.
2-20
HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide
HP CONFIDENTIAL
Codename: Moonstar 306 Part Number: 293164-004 Last Saved On: 9/22/03 1:47 PM